HomemadeTurbo - DIY Turbo Forum - 94 Turbo Integra **$3000** OBO

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Turbo Parts For Sale (https://www.homemadeturbo.com/turbo-parts-sale-9/)

- - 94 Turbo Integra **$3000** OBO (https://www.homemadeturbo.com/turbo-parts-sale-9/94-turbo-integra-%2A%2A%243000%2A%2A-obo-49855/)

94 Turbo Integra **$3000** OBO

I've decided it's time to move onto another project. Always something bigger and better out there.

I bought the car from a friend a little over a year ago in October of '04. The body is rough, but it runs well, and now has more goodies than when I bought it.

VIN # upon request.

All parts listed below have a mere 2200 miles on them at the moment. Finally got the car together about 2 months ago. So it's all very new under the hood with exception of the turbo stuff.

Engine specs:
b18a block (Hot tanked, blasted, bored, honed and decked by local machine shop. Bore is 81.5mm)
Wiseco GSR 9.1 Compression pistons (81.5mm obviously)
Wiseco Rings
Eagle GSR rods
ACL bearing kit
Micropolished GSR crank
New upon installation;
b18c oil pump
Pro Street Online Timing belt kit
OEM Honda Headgasket
All other gaskets and seals brand new upon installation
All ARP studs and bolts

Turbo setup:
BMC log manifold
14b turbo (ported inlet. No shaftplay in or out or side to side when we had it all apart for the engine rebuild)
Open DP from 2.5" to 3"
2.5" Crush bent IC piping
Unknown brand on the Intercooler dimensions unknown. Has served me well on 12psi never had any issues with it.
DSM 450cc Injectors with inline resistors (soldered and taped)
Odd ball couplers, never given me a problem.
It's a "rough" kit, but has done quite well, and is most defintely upgradeable, especially with the built bottom end.

Clutch:
Exedy Stage II clutch kit
Thick Cerametallic 3 puck
Exedy Pressure Plate
All new bearings included with the kit

Head:
Newer LS head. Bought from a local guy with 34k miles on it. A customer was going LS/Vtec and that's where the head came from. Head was sent to the machine shop along with the block, and pressure tested, and cleaned up.

Fuel Managment:
P75 chipped
Uberdata Street Tuned at 12 psi with the current setup. (Spikes 12, instantly falls off to 11psi and holds through the first 4 gears.)
It was tuned by "adseguy". That's his member name on H-T. Here is a link to his post after tuning his own stock block LS; http://www.honda-tech.com/zerothread?id=1307884
At least you can see what he's capable of, and ask him about me for yourself if you'd like.

It has a few issues however. It doesn't much like to idle when it's cold. You have to let it get up to operating temperature before it runs right, and holds a steady 1k idle. I believe it to be the IACV, simple fix, just haven't had the time between work and whatever else. Once it's warm though, it runs quite well.

I know it's Frankensteined with the GSR rotating bottom end, and LS head, but I personally didn't notice a loss in torque perse over the LS stroke, even though it's there. The compression with the LS head should be right around 8.8 or so, and with a GSR head obviously it'd be 9.1 as advertised from Wiseco.

With the body in the condition it's in, it would make a perfect track car. The kind of car you wouldn't mind tearing apart the interior and going to town with it. My builder took it to a track in Arkansas and said he ran a 13.0 @ 107mph on the 195 All Season tires. I don't have slips to back it, but it's defintely a low 13 second car and a bit faster on some stickier tires.

**I will have pics up tonite when I get back to work, as they are on my lap top, and I'm on a work computer at the moment**

I'm sure I'm leaving some things out, but if I think of anything else I'll post up most defintely.

Call my cell at 417-459-6381 to discuss anything in a more timely manner as I don't have internet access until after midnight any given night. Names grant by teh way

Looking for $3100 OBO

Re: 1994 Turbo Integra *built*

You have two post and you want to sell a car? <_< Sketchy

Re: 1994 Turbo Integra *built*

Links to my photo album

http://photobucket.com/albums/c397/GrantH91/

Here is a link to my ebay rating; http://feedback.ebay.com/ebaymotors/...iid=8012397811

I'm located in Springfield MO. Can arrange shipping at buyers expense/request.

Like I said in my other forsale post. I had a username (gunit), and lost the password after not being on in so long, and never could get my password emailed to me. So, I had to make a new user name.

Re: 1994 Turbo Integra *built*

bump for a good deal on a doo doo brown interior teg... have any pics of the motor being built ?

Re: 1994 Turbo Integra *built*

Holy crap that exterior is rough.

Considering trades?

Re: 1994 Turbo Integra *built*

why would you build a motor then throw a 14 b on it and a b18b head? :l

Re: 1994 Turbo Integra *built*

I can vouch for this setup. I have been here since day 1 of the car being boosted. Now all he wants is a new car, since the chix love that "flashly" look ifyou know what I mean ;) :6 :8 Great car! Runs great! I would buy it if I had the extra money right now, but I have a $900 insurance bill, $550 payment left on my current teg & a $1500 credit card bill. Bump for a bad ass seller!

P.S. The reason why it has a b18b head & 14b is b/c I dont think he could afford to put anything else on there. His parents paid for the rebuild & not everyone has the money to do everything at once. There is PLENTY of power & potential left in this car!

Re: 1994 Turbo Integra *built*

hey i am a personal friend of grants and have seen and ridden in the car... it ran a 13.0 @ 107 on all season tires.. it is a real mean sleeper and runs real good for what it is... here is a link to a vid of him and a local single turboed ls1 camaro racing... just to give you an idea of what this car is.. the camaro outran(on the highway) another local single turboed supra that ran an 11.3 at the track..
so i will vouch for this car and hope he gets it sold.... he is askig a very fair price....

vid link

http://x700.putfile.com/videos/27410395472.mpg

Re: 1994 Turbo Integra *built*

Quote:

Originally Posted by rawr

why would you build a motor then throw a 14 b on it and a b18b head? :l

I pieced together the kit it has on now, before I got the motor built. I turbo'd the car on teh stock b18b, and used it up. That's when I went with the rebuilt option. And defintely didn't have the money to upgrade turbo, and head and all that goes with it.

Re: 1994 Turbo Integra *built*

I maybe interested in possible trades, partial, etc. PM me with what you've got if interested.

On another note, the car will most likely go up on ebay late next week if there is no more interest here.

Thanks for looking guys

Re: 1994 Turbo Integra *built*

Still for sale guys.

Shoot me some offers or something.

Thanks for looking

Re: 1994 Turbo Integra *built*

TTT

I want it gone.

$3500 OBO OBO OBO

Shoot me some offers guys, people are flaking hardcore.

I don't want this thing anymore.

Re: 94 Turbo Integra **$3100** OBO

I have lowered the price to $3100 due to a few things.

Number 4 fuel injector is leaking, simple fix. Haven't driven it preiod since it developed the leak last week. I can have it fixed, or shoot me an offer for the way it is. The car will most defintely make it onto a trailer or whatnot for shipment or pickup.

On top of that, I just obtained a small loan, to put towards a certain Formula I've been looking at, and will need what little I can get out of the teg to get it.

So, on those 2 notes, shoot me some offers, I need this thing gone quick. I'm defintely willing to work with someone serious now, need it gone this week or so.

Give me a call at 417-459-6381 to discuss anything in a more timely manner, as I don't have internet access until after midnight any given night. Names Grant by teh way

Help me out guys

Re: 94 Turbo Integra **$3100** OBO

trade for a semi built 90 b16 hatch ...ctr internals, i/h/e fpr, ported head ported im ported tb , runs and drives great no heater ... heater core leaks have new heater core ... lowered monroe struts not installed yet drop zone springs xsi b16 tranny short shifter gt steering wheel gauges gutted rear interior ... no carpet .. 04 celica gts seats ... i can take pics if you interested

Re: 94 Turbo Integra **$3100** OBO

p.s. video of you and the camaro doesnt work :o

Re: 94 Turbo Integra **$3100** OBO

https://www.homemadeturbo.com/forum/...3407#msg593407

i would trade you for both my cars if interested... My hatch and my accord. Let me know.

Re: 94 Turbo Integra **$3100** OBO

These two recent offers are defintely thinkers.

However, I just took on a full loan for the Formula, and at this point, just need to sell the teg outright and get some money to put towards the formula.

Keep hitting me with money offers though guys.

Re: 94 Turbo Integra **$3100** OBO

Quote:

Originally Posted by ososlohatch

bump for a good deal on a doo doo brown interior teg... have any pics of the motor being built ?

I just wanted to vouch for this car. I have rode in it, worked on it, and even owned it before it was turbo ....

I was present for most of the motor build and I can attest to the fact that it is currently running eagle rods with the upgraded 3/8" rod bolts, Wiseco 81.5mm 9:1 GSR pistons, new Wiseco rings, GSR crank, ACL bearings, etc.

I personally know the builder of this motor and can vouch that he is a very capable mechanic, the block was professionally tanked/bored/honed by Dicks Machine shop in Springfield MO , and very carefully assembled with all clearances triple checked.

I would imagine with the asking price what it is this is one of the fastest hondas in this price range ...

Re: 94 Turbo Integra **$3100** OBO

TTT

Anyone have a little extra money after the holidays or tax money coming in soon?

$3k

It's just sitting there being "pretty"