20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

https://i16.photobucket.com/albums/b.../slicks001.jpg
https://i16.photobucket.com/albums/b.../slicks003.jpg

fairly New. used for about 3 runs at the track. These are road race tires made by hoosier. Local Pickup preffered in whittier. 150.00 obo. Includes the rims. (s0old to mike)

https://i16.photobucket.com/albums/b...intakes032.jpg
https://i16.photobucket.com/albums/b...intakes031.jpg

all steel non flex type bar. 80 obo buy this!

GT2560 from an Isuzu NPR// includes downpipe flange/240 shipped
.60 on compressor and .67 on exhaust side
http://i3.ebayimg.com/01/i/07/25/bf/6b_1.JPG
https://i4.ebayimg.com/01/i/07/1f/da/ag_1.JPG
http://gtfabrications.com/phpthumb.p...EN/sdfsdfs.jpg
https://i1.ebayimg.com/01/i/07/1f/e7/ca_1.JPG Sold to crxspooling

Need money for school so i willing to negotiate as long as you dont make some gay offer. PM me

Oh also 1" master cylinder and brake booster 80 bux also (donated to the minnesota gringo, come pick it up when you come to cali)

i have several ecu's make reasonable offers
ps9,,p14,p07, pg7 lmk

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's
 

Whats up with the master cylinder puto?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's
 

I like the hmt style Nology wires your rocking. That bar is pretty nice though. Didn't mike used to run those rims? They look familiar for some reason.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's
 

specs on the rims..........like info off the backside..........

http://www.bettendorf.com/~mrbone/pi...s/MeAutox3.JPG

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's
 

ill try to get that for you today. They clear integra brakes as long as you grind the caliper a bit. here they are on my car
https://i16.photobucket.com/albums/b.../slicks007.jpg

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

where are u located. hows anyone gonna pick sumthin up if they dont know where you are!!!

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

this nigs over here in L.A. yo

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

Hey dont get your panties in a bunch buddy. Bump for a non mexican :P

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

Is that NPR snail ball bearing?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

no this one is not bb. but it still kicks ass. buy it now buy buy buy!

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

i want the rims.
don't u owe me some mula mang?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

i hate you. Come pick them up and well talk


then ill break your knee caps

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

13x7 AR234's ZERO offset :)

damnit.......

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

Ugh, I'd offer you money for the slicks, but road race?


JP

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

you are correct.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

yeah, get a fedex cost to 45231.....band/tape then bitches together.

I've got 25-30 Hoosier slicks here via midohio runoffs, only really want the rims.

Quote a price shipped on the rims, rubber if you have to leave it on.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

hey rene those slicks fit on 92-95 civics?? I didnt think 13 inch rims would fit on are civics??

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

if mista bone just wants the rims ill take just the tires if they'll fit on 13" steelies ... also what motor did you run that turbo on .. you think it would be a good turbo for a built z6 ?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

They won't fit ex/si civics, but I know they fit dx/vx hatches with factory brakes, probably others too.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

What kind of 60' could someone throw down on these? I know they're a harder compound since they're R/R slicks (and their design is different), they're not going to hook as well as a true drag race slick.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

They do fit but you have to mod the caliper a bit. As you can see they are mounted on my car and it has integra brakes on it. you need to grind about 1/8 of an inch on the top of the caliper to make them fit.
https://i16.photobucket.com/albums/b.../slicks006.jpg

Also, i think their sold, kinda Whiterice might take them but im not sure yet, nothing in stone yet.

Everything is obo guys, make me an offer i cant refuse...

Not really sure. the time i went to track with these i was having shifting issues so i never really got a solid time. They do need to be warmed up. I say use them for road racing instead of drag.

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

what motor did you run that turbo on .. you think it would be a good turbo for a built z6 ?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

i never got a chance to use the turbo. i think it might have some lag but top will rip

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

im going to get them tomorrow

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

someone buy this turbo!

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

any of your odb0 ecu's chipped? or can u chip them? if so i want one

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

how much you want for the turbo ?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

is that a HF adapter on the turbo? how much for that or is it included?

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

pmed

Re: 20x8x13 slicks! //HMT Bars// 1" master cylinder for EG// ECU's//GT25 GARRETT
 

turbos gone, and wheel /rims are gone whenever mike feels like comeing over to pick them up. oh and stealth gets the master cylinder. anyone want some ecu's?