Forced Induction Custom FI Setup Questions

Anything use 2.4 ohm 52# for stock injectors?

Thread Tools
 
Search this Thread
 
Old Jun 18, 2008 | 11:18 PM
  #1  
mopar318's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2007
Posts: 327
Default Anything use 2.4 ohm 52# for stock injectors?

Im needing to get a set of 2.4 ohm 52# injectors. (550cc) for my daytona. Mopar performance sells these as "+40" injectors but i wanting to see if any other cars use them stock, so I get can them cheap.

I need these to go along with the calibration I am getting.
Old Jun 19, 2008 | 02:06 PM
  #2  
Hitchhikkr's Avatar
3.0 BAR
 
Joined: Oct 2006
Posts: 2,329
Default Re: Anything use 2.4 ohm 52# for stock injectors?

Some boosted rx7s (cant remember what year) use High imp 12ohm 550ish injectors but good luck finding them.

I think evo's have something close to that size too...
Old Jun 19, 2008 | 05:26 PM
  #3  
mopar318's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2007
Posts: 327
Default Re: Anything use 2.4 ohm 52# for stock injectors?

Originally Posted by Hitchhikkr
Some boosted rx7s (cant remember what year) use High imp 12ohm 550ish injectors but good luck finding them.

I think evo's have something close to that size too...
Yeah, well i found a bunch of high ipedience injectors. Ill see if they can do the calibrations to run them, but Im not sure if they can. Ill probally just dish out the 150 bucks for the Mopar Performance ones.
Old Jun 19, 2008 | 07:58 PM
  #4  
pissnuts's Avatar
1.0 BAR
 
Joined: Nov 2006
Posts: 508
Default Re: Anything use 2.4 ohm 52# for stock injectors?

Originally Posted by mopar318
Yeah, well i found a bunch of high ipedience injectors. Ill see if they can do the calibrations to run them, but Im not sure if they can. Ill probally just dish out the 150 bucks for the Mopar Performance ones.
cheaper than here
http://www.fwdperformance.com/store/...=Fuel%20System
Old Jun 19, 2008 | 08:12 PM
  #5  
mopar318's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2007
Posts: 327
Default Re: Anything use 2.4 ohm 52# for stock injectors?

Originally Posted by pissnuts
No i was mistaken. They are about 200 dollars. I dont think ive found any +40's for 150, thats for the +20s

Im going to be running 25psi, on a 3 bar map. So I need more than the =20's
Old Jun 21, 2008 | 02:13 AM
  #6  
HiProfile's Avatar
1.5 BAR
 
Joined: Mar 2005
Posts: 723
Default Re: Anything use 2.4 ohm 52# for stock injectors?

That site lists Deka injectors for "stock turbo 2" injector replacements, and that's the "common" design from Bosch IIRC. $160 for 550cc injectors that size/design is a good deal, assuming its virtually the same size as Honda injectors. There are a few OEM 550cc sizes, but they aren't common. Basicly supras and the rx7's larger secondary injectors are the right sizes (USA), and stock WRX injectors can be modded to an estimated 650-780cc (usless if you have a cal that requires 550's).

http://www.robietherobot.com/Storm/f...ectorguide.htm

btw forgot to add - 2.4ohms is going to be "low-z" low impedence, peak & hold injectors. They're not some special injector, its just that the Dodge guy who 1st coined that term had his head up his *** and didn't see what the rest of the industry (including the injector manufacturer!) called them. You can always count on Dodge guys being ***-backwards
Old Jun 22, 2008 | 09:26 PM
  #7  
mopar318's Avatar
Thread Starter
1.0 BAR
 
Joined: Dec 2007
Posts: 327
Default Re: Anything use 2.4 ohm 52# for stock injectors?

Ok well its going to be 180 bucks for the Injectors for all 4. Not too bad I guess. I think Ill just get them from mopar performance. That way I wont have to worry about gettting the correct harness, and new o-rings. Plus if I decide to sell them ill only lose about 40 bucks on them. They are going for about 140 used but most the turbo dodge guys hand on to them so they arent up for sale much.

Im just used to being able to get FMS injectors for 100 bucks for a set of 8.
Old Jun 30, 2008 | 05:19 AM
  #8  
oinesra's Avatar
0.5 BAR
 
Joined: Dec 2007
Posts: 113
Default Re: Anything use 2.4 ohm 52# for stock injectors?

87 and some 88 turbo rx7s have low imp. 550cc injectors.

http://www.rockauto.com/catalog/x,ca...,parttype,6224 only

good price ^^
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
niL
Turbo Parts For Sale
1
Nov 13, 2006 12:36 PM
SpoolNSol
Forced Induction
4
Mar 22, 2006 10:16 PM
SpoolNSol
Forced Induction
7
Mar 12, 2006 12:28 AM
bipedbear
Hybrid/Tech
11
Oct 24, 2004 11:14 PM
dingusjt
Forced Induction
3
Feb 8, 2004 11:56 AM




All times are GMT -5. The time now is 02:14 PM.