do you remove the wires from the ecu plugs without breaking the pins,i need the help people.

 

smash the end of a paperclip with a hammer.

 

thanks on some of the info i'll give it a try.any more clues.thanks for the reply jago.

 

both of those worked when i tried it...

 

which end would i use the precision screwdriver,and also phillips,flat head or what.thanks

 

ok first go grab a mini screwdriver, or a eye glass tool kit.

eye glass tool


looking at the ecu side of the plug place the tool in the middle ( between the pins there is a little open space)


push the clip holding the pin in the plug towards the center of the plug. this will allow you to pull the pin out the back.


this gets easier the more you do it.

 

ok really easy on the clear plug but what about the 2 black plugs (b&c),those are a bitch to do atleast i think.
p.s. excellent photo's.

 

ive always used a needle on the black plugs.be sure to remove the plastic keepers.

 

yup, you'll get some good bite on the little plastic thingy that you're trying to pop up to release the pin.