BOV with 1G DSM flange

Reply Subscribe

Thread Tools

Search this Thread

Nov 8, 2007 | 12:21 PM

HMTguy

Guest

Posts: n/a

BOV with 1G DSM flange

Need a replacement for my 1G DSM that will hold at least 20+ psi, hit me up

Nov 8, 2007 | 12:25 PM

SDRAWKCAB

3.0 BAR

Joined: Jul 2006

Posts: 2,349

Re: BOV with 1G DSM flange

Quote:

Originally Posted by jagojon3

Need a replacement for my 1G DSM that will hold at least 20+ psi, hit me up

Greedy style will fit on a dsm flange if you re drill it.
I think, so don't hold me to it.

Nov 8, 2007 | 01:16 PM

HMTguy

Guest

Posts: n/a

Re: BOV with 1G DSM flange

It can, it doesn't use all of the flange on the BOV though so it's not as strong. Anyways I don't like how they sound.

Nov 8, 2007 | 01:18 PM

ghettoturbo

Guest

Posts: n/a

Re: BOV with 1G DSM flange

ill crush my dsm bov and send it to you....or ill mail you a vise

Nov 8, 2007 | 01:21 PM

HMTguy

Guest

Posts: n/a

Re: BOV with 1G DSM flange

I have a vice and thought about it, but survey says it only holds a max of ~22 psi after crushing.

Nov 8, 2007 | 01:23 PM

Minor Threat

3.0 BAR

Joined: Mar 2004

Posts: 1,729

Re: BOV with 1G DSM flange

Quote:

Originally Posted by jagojon3

I have a vice and thought about it, but survey says it only holds a max of ~22 psi after crushing.

JB weld the bleed hole shut. 30+ psi, no problems.

Nov 8, 2007 | 04:02 PM

HMTguy

Guest

Posts: n/a

Re: BOV with 1G DSM flange

Haven't thought of that...

Nov 8, 2007 | 04:43 PM

Minor Threat

3.0 BAR

Joined: Mar 2004

Posts: 1,729

Re: BOV with 1G DSM flange

Quote:

Originally Posted by jagojon3

Haven't thought of that...

Try it, it works. JB is the HMT option, you could also tap it and thread a plug in or something. I believe Eville140 did the same thing on his 2.3 turbo, said it works well but he would recommend it only if you're going to run 15+ psi. There's a site out there, I had it bookmarked but lost the harddrive, on how to modify a 1G BOV so you could have it plugged or working like stock.