Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

WHAT the F#$# ?!?!?!

Thread Tools
 
Search this Thread
 
Old Jul 13, 2003 | 10:44 PM
  #1  
ONIN's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 170
Default WHAT the F#$# ?!?!?!

i've got a problem and seems to be related to the feul system.

I was doing 200km/h on the highway at full throttle...air fuel gauge was reading rich, almost all bars to the right. then i heard a loud THUD! or POP/THUD sound! i got a little apprehensive so i let off the gas and stayed at 100 km/h. before that i used to idle VERY rich, now I am idling only 2 bars on the rich side. the main concern i have is when i am driving: I drive hard all the way to around 4-5000 rpm and the engine cuts off...like it gets choked or something. I am running a lot less richer and the car has trouble handling full throttle: it cuts out.

My problem has to be fuel related because i bought a brand new BOV, and sealed any possible leaks exhaust or charge pipe. I am thinking it could be the pump starting to give OR maybe the injectors are being overloaded.

thanks,
chris
Old Jul 13, 2003 | 10:53 PM
  #2  
Chacko's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 1,495
Default Re:WHAT the F#$# ?!?!?!

uh a pop/thud sound is usually threads being stripped from to much pressure I think your problem is either going to be a blown fuel pump, or something worse in the motor itself.
Old Jul 13, 2003 | 11:08 PM
  #3  
ONIN's Avatar
Thread Starter
0.5 BAR
 
Joined: Feb 2003
Posts: 170
Default Re:WHAT the F#$# ?!?!?!

if my fuel pump is blown, would i still be able to hit full throttle? it just seems that whenever the load on the engine increases the car freaks out and shuts off.
Old Jul 14, 2003 | 12:16 AM
  #4  
OnYx's Avatar
3.0 BAR
 
Joined: Nov 2004
Posts: 5,101
Default Re:WHAT the F#$# ?!?!?!

do a compression test. it might have stripped a headbolt out of hte head. even go and retighten the headbolts abd try again. remember to follow the pattern.
Old Jul 14, 2003 | 01:45 AM
  #5  
Chacko's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 1,495
Default Re:WHAT the F#$# ?!?!?!

don't over tighten!
Old Jul 15, 2003 | 04:09 PM
  #6  
45psi's Avatar
0.0 BAR
 
Joined: Feb 2003
Posts: 0
Default Re:WHAT the F#$# ?!?!?!

whats the pattern?
Old Jul 15, 2003 | 07:39 PM
  #7  
Chacko's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 1,495
Default Re:WHAT the F#$# ?!?!?!

Theres an order to tighten down the head bolts, don't have a user manual or I would say. I am pretty sure you start outward and move inwards or something like that.
Old Jul 15, 2003 | 07:52 PM
  #8  
J-SMITH69's Avatar
0.0 BAR
 
Joined: Dec 2002
Posts: 0
Default Re:WHAT the F#$# ?!?!?!

start in and move out in a cross pattern and you will be fine. but its always nice to have a book




All times are GMT -5. The time now is 06:50 AM.