Can anyone burn me a chip for a pr3 chip ecu(b16A) that will run 450cc injectors, turbo tables for up to 10psi? I have an ic socket soldered in my ecu but need a turbo program to run now. If anyone can do this how much would it be? I will be running a t3/t4 hybrid and will be intercooled.

 

who is going to tune it for you? i am sure they would be the best person to help you out

 

I will be tuning it myself. Basically I need a basic program to run the car under boost. I dont have the money to run an aftermarket system that is programmable.

 

Its not that I cant make a basemap , I dont have the eqipment to do it( burn it). Second of all I dont have the money to buy a programmable ecu and laptop. I just need a chip with a turbo program that will run 450cc injectors. I have one for 10 psi but its for 240cc injectors. I came to this forum because I figured Id have the most knowledge here. This is the last thing I need to get my turbo kit together.

 

I have an ic socket soldered into my ecu that will allow me to remove and install different programmed chips if thats what you mean by programmable.

 

yes it's programmable then. You don't NEED a laptop, just a $50 burner, and some paper and pencil.

 

Well at this moment I just need a base program so I can get the car running. After that if I have issues I will adress them as I go (i.e. drivablity problems). I'm gonna be running 450cc injectors so I need something to make sure they have the right pulse width and the right timing curve as I boost.

 

If you make the program and email it to someone with a chip and a chip burner...I am sure there are many here that would help you out.

I myself would do it for $8 shipped...