help with wiring HONDA

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2006 | 07:51 PM

onetwothree

Thread Starter

0.0 BAR

Joined: Dec 2006

Posts: 3

help with wiring HONDA

i just bought a 1992 honda civic cx and also got a great deal on a complete d6z6 swap with everything...since i have the p28 and the orginal d16z6 engine harness.....do i still have to rewire my chassis harness so vtec will work...and if i do does anyone here have a write-up on how to do it...or a website....thanks any help...?

Dec 13, 2006 | 07:55 PM

HMTguy

Guest

Posts: n/a

Re: help with wiring HONDA

You're in luck, vtec is pre-wired to the engine compartment harness on all 92 Civics, and '92 only. You will have to run just a couple foot long wires under your hood which will be a snap.

Dec 13, 2006 | 08:07 PM

onetwothree

Thread Starter

0.0 BAR

Joined: Dec 2006

Posts: 3

Re: help with wiring HONDA

nice pics.....but um...which wires do I run under my hood...?thanks

Dec 13, 2006 | 08:13 PM

HMTguy

Guest

Posts: n/a

Re: help with wiring HONDA

You run the vtec solenoid and the vtec pressure switch to the 2 wires picture at the shock tower plug, and one more wire from the pressure switch to any ground.

Dec 13, 2006 | 08:48 PM

onetwothree

Thread Starter

0.0 BAR

Joined: Dec 2006

Posts: 3

Re: help with wiring HONDA

on the cabin harness I located the vtec solenoid and pressure switch wires. I opend the connectors and on the engine harness there's already 2 male ***** that goes into the vtec solenoid and pressure switch female's connector....now my question is that do I STILL have to wire them up or do I just wire the one of the pressure switch to ground..? motor is in the car..and I have no CEL...let me know..

Dec 13, 2006 | 08:52 PM

HMTguy

Guest

Posts: n/a

Re: help with wiring HONDA

I don't quite understand what you're saying, take some pics or try explaining more clearly.

Dec 13, 2006 | 10:54 PM

Sepheroth86

0.5 BAR

Joined: Jul 2006

Posts: 189

Re: help with wiring HONDA

if you have the engine harness for the D16Z6, it is 100% plug and play with the 92 chassis harness. just drop in the engine and go. thats exactly why, when I bought an EG, I bought a 92.