hi .....i'm from greece and i would like to make my car turbo....for start i would like to do it with oem parts....
what do you believe is the best to do??
what turbine ....intercooler.....fuel inj....fuel programm( i believe with emanage i do my job)
and what other material i would need
here in greece d16y8 is like dead!X almost no one tuned!
sorry for all the stupid questions

 

"start with oem parts" Do you mean you'd like to start out with your engine the way it is? (stock)

Read here:

https://www.homemadeturbo.com/forum/...?topic=28135.0

should answer most of your questions

and welcome to the site

 

yes with stock engine and around 190 hp.....thanks for the tip....i took a look to the link))) sorry for the double post

 

Well first off I would read the FAQ we have in the forced induction section. Doing research and understanding what your doing is going to be the best thing you can do. As far as the turbo kit itself, a T3 turbo will work well, I personally have a T3 .60/.48 and I love it, not too small and not too big. I would defintely go with an external wastegate, an internal will work, but it didn't work well for me when I wanted to boost more than 10psi. Fuel management and tuning and probably the most important part, so read up on that. Coverting to obd1 and running Crome will be your cheapest and best option. Other than that there isn't much to it. 200-220whp should be fine on the stock motor.