running N/A with chipped ecu???
Thread Starter
1.5 BAR
Joined: Feb 2005
Posts: 1,181
running N/A with chipped ecu???
i have a chipped ecu for my turbo set up but i want to run N/A for a while.....is their anyway to make it run as it was stock?...mabe take the chip out?..or should i just buy a new ecu?
3.0 BAR
Joined: Mar 2003
Posts: 5,271
Re: running N/A with chipped ecu???
I would burn a stock chip as well but you could also just install your injectors for boost and run the "boost chip". You might notice some horrible gas mileage from not being tuned, but it's an option if you needed to.
3.0 BAR
Joined: Jun 2003
Posts: 3,974
Re: running N/A with chipped ecu???
Originally Posted by jagojon3
You can either cut the jumper at J1 to return your ecu to stock or burn a stock bin on the chip, whatever's easier for you. Personally I would just burn a stock bin on the chip.
ur running a y8 in an ek? conversion harness w/obd1 ecu? which ecu?
Thread Starter
1.5 BAR
Joined: Feb 2005
Posts: 1,181
Re: running N/A with chipped ecu???
naw my car isnt really running that great so im taking my turbo set up off and going to run N/A for a while..i just pm'd xeno about sending me a chip with a stock map on it...no im running a d16z6 5spd..so i have a p28
Thread Starter
1.5 BAR
Joined: Feb 2005
Posts: 1,181
Re: running N/A with chipped ecu???
Originally Posted by whiterice
if you have a p28 then just cut the jumper and it will run the stock z6 map. simple.
im not good with wire'n..also im not affraid to cut the wires ..that jackass who owned the car befor me had a safcII in it and some ------s stole it and left the harness in it..so i had to remove the harness and wire it back up...thaks for the help guys
