Best way to grind welds smooth
Thread Starter
1.5 BAR
Joined: Oct 2004
Posts: 734
Best way to grind welds smooth
A friend and I are trying to figure out the best way to ground MIG welds smooth on charge pipes, we've tried a normal angle grinder and it was hard to get it decently smooth, any ideas ?
1.5 BAR
Joined: May 2005
Posts: 840
Re: Best way to grind welds smooth
If they are going to be painted when done, just grind them downa dn then use a little body filler and sand by hand. You won't even be able to find them after painting if you do a decent job.
Later
Randy
Later
Randy
0.0 BAR
Joined: Oct 2003
Posts: 0
Re: Best way to grind welds smooth
Originally Posted by Engloid
Unless you're getting full penetration, you'll probably be grinding half the strength off your welds.
If that's ok with you, it's your stuff to do with what you want.
If that's ok with you, it's your stuff to do with what you want.
