turboing 93? cellica gt,
my friend wants to turbo his cellica gt the 2.0 dohc i think. it is an automatic, and we found a tranny, dont turbo and auto disagree? and are there and write ups on turboing this car on here? he says this site is for honda's only i said ---- that but he dont believe me. 
-Stephen

-Stephen
If it's a GT, your friend has a 5SFE, which is a 2.2 liter DOHC. The auto trannies hold up just fine with boost, but they rob a lot of power. There's a guy on Celicatech who only made like 150 hp on 8 psi on the auto tranny, where another made almost 210 on 8 psi through a manual.
This will make your life a lot easier -
Source a turbo manifold, turbo and downpipe from either an MR2 turbo or a Celica Alltrac (5th gen only). Make sure it's the twin scroll entry, and not the single. Also source the oil pan, oil and water line fittings, and 2 bar map sensor from the same cars. Then get some DSM 450's, an intercooler, some charge piping, an MR2 BOV (Which is really damn good) or a DSM one. After that, you can choose if you want to run an SAFC/MSD BTM or SMT6. The SMT6 kicks *** in every way, so I would recommend going that way.
Have fun.
-Colin
This will make your life a lot easier -
Source a turbo manifold, turbo and downpipe from either an MR2 turbo or a Celica Alltrac (5th gen only). Make sure it's the twin scroll entry, and not the single. Also source the oil pan, oil and water line fittings, and 2 bar map sensor from the same cars. Then get some DSM 450's, an intercooler, some charge piping, an MR2 BOV (Which is really damn good) or a DSM one. After that, you can choose if you want to run an SAFC/MSD BTM or SMT6. The SMT6 kicks *** in every way, so I would recommend going that way.
Have fun.
-Colin
Hey!
I am working on a setup for my camry. And here is the list I have thus far. It also has the 5SFE.
3SGTE Turbo manifold
3SGTE CT-26 Turbo off of a MR-2 turbo.
2JZGE Injectors
For management, I would look into Megasqirt. If you cannot put it together, there are people that can for a little fee.
Hope this helps,
Edit: get a tranny cooler.
And check out toyotanation.com forums. There is tons of information on 5SFE turboing.
I am working on a setup for my camry. And here is the list I have thus far. It also has the 5SFE.
3SGTE Turbo manifold
3SGTE CT-26 Turbo off of a MR-2 turbo.
2JZGE Injectors
For management, I would look into Megasqirt. If you cannot put it together, there are people that can for a little fee.
Hope this helps,
Edit: get a tranny cooler.
And check out toyotanation.com forums. There is tons of information on 5SFE turboing.
we just got done turboing my buddys celica, go to the engine managment forum and look for toyota engine managment!!!! acually heres the link https://www.homemadeturbo.com/forum/...?topic=52918.0 anyways so far it is holding up great!! feels great too!!!
Thread
Thread Starter
Forum
Replies
Last Post



well what year is yours? and is it turbo's? i cant remember teh enigne code. 4sfe i think is the engine code. you got any write ups?
