I have been reading up on this for about a week now and have come to the conclusion that I am a broke *** and I need to keep the price down. LOL

I would like some opinions on these:

* Exedy Clutch Single Plate Organic Full Face Disc

* Exedy Clutch Ceramettalic Kit (Stage 2 )

* Centerforce Clutch Dual Friction Set (i am lean toward this one)


Here is my current set up.

D16z6
TE04H 5-10psi
450 injectors
crome pro
head is not buit neither is the block


Because this is my daily drive i need to be as smooth as possible with shifting. I don't race very often; I just like playing with my car.


Thanks for any help you can provide.


Austin

 

Check with Mike at www.lsdmotorsports.com He has the best deals on clutches. Most of the HMT guys run one of his clutches.

 

ive herd the Exedy are total crap, but i have never acually had one so i cant confrim this

 

get a proclutch off ebay. search for "proclutch" under user id. they are daikin clutches...stage 3 is up to 270 hp, 6 puck and warranteed for 12,000 miles or 12 months. only like 161 shipped for a civic. thats what im buying for my setup, and ive only heard good things about them.

 

Id personally only run either a Clutchnet or a Clutch Specialties or ClutchMasters...

 

thats just from your personal experience after what you did to that poor 4 puck

 

Im calling LSD motorports as well but whatever you do avoid Centerforce as they are not good for much boost at all on a Honda.Mine started slipping at 10psi from a T25 on a D16a6 and upon some resarch i found this is a common trend.

 

I have run three centerforce clutchs all dual fricton, my 12ich 1 ton chevy 4x4 with a 454 was the only good one, my porsche and mazda was ----.

 

lol zack... that was a 3 puck UNSPRUNG Spec Clutch. Now i run a clutchnet dual diaphram 6 puck sprung. I love it

 

Centerforce clutches for small applications lack the weights on the pressure plate that supposedly make them so great.I have used the dual friction in 4x4's in the past and had great luck when running 35's on a Yota with 4:10 gears and a 4banger so I think they are only good for larger applications.Too bad as they are dirt cheap through Lordco.I had a conversation with a tech guy from Centerforce after mine started slipping and he told me for a Honda/import they are only good for low torque all motor setups.