Ok I searched and couldnt find anything. Will any dseries, including the d15 oil pumps work with the z6?

 

yea jerk nuts, same part numbers
89 1.5 dx Part #A6010-32121
89 1.6 si Part #A6010-32121
93 1.5 dx Part #A6010-32121
93 1.6 si/ex Part #A6010-32121

 

<---- you.

 

While you're at it, throw a slightly higher tension spring in the release valve on the oil pump...gives you better and higher oil psi's. Old trick used on the old a6 track crx back when i used to work for my old race shop.

 

A few washers and bam! The pressure is up.

 

If your nuts too you can go through the block where the oil passages are and grind down and smooth out some of the angle's and such to assist oil flow a bit more. Endyn does this with their oil pumps to help out the flow