Today I took my crx to the dyno, here are the the specs and a link for details.
88 crx, d16z6 swap obd1, std manifold, 14b, 450cc, 1g eclipse bov, uberdata 1.66, 5" jhonny racer intercooler, 2.25" down pipe, 2" charge pipes, 2.25 crush bend exhaust with a rectrictive resonator.

The car is running too rich, look after vtec, I need help with this, what should I do on this base map. Maybe 5% less fuel after vtec? I need some input here.

http://bellsouthpwp.net/c/r/crxlover/crx.xls

Here as an image:
http://bellsouthpwp.net/c/r/crxlover/crxdyno.jpg

Here is the file I'm running, I got it from a guy on the uberdata forums.
http://bellsouthpwp.net/c/r/crxlover...ngskickass.bin

 

did you tune the map to your car or just run pat's tune and hope for the best?

my computer wouldn't open the dyno sheet but what were your numbers?

 

I ran pats tune and hoped for the best.
I got 157.4 whp at 6700rpms

 

i also cannot view them.

standard calculation for 450cc injectors tells us that adding 8.6% fuel will change your air/fuel ratio 1 full point. so take it from there and get yourself in 11.5:1 land.

 

I renamed the file just in case, let me know if you guys can see it now.

 

the problem isnt the filename its the lack of having microsoft excel to do it.

most people post dyno sheets and such as jpg's

 

Hot dam, 167whp on Pats bin that has fuel for 220ish whp, good god that must be running rich on your ride. How much boost? Im assuming that wasnt 10psi?
Pats bin was pretty much only tuned for WOT and 10psi. I then adjusted the lower boost columns so they mirrored the TQ curve, 'looked' good, and provided for good A/F's as it swept through them on spool up. Always cracks me up how many people run his bin. It represents about 20min worth of "3am, oh man gotta whip up base map for the dyno tomarow", about 15mins on the street, and I think about 6-7 pulls on the dyno. Then consider that it has been C/P into each newer version of Uber, and who knows what the fuel is at these days. lol ---- rips though, as long as your engine is getting fed enough air for all the fuel thats in Pats map.

 

here you go

http://bellsouthpwp.net/c/r/crxlover/crxdyno.jpg

 

wow , those are some crappy numbers. where did they have the WB02? i would say get it tuned to your car then try again, your not gonna make as much power as him with a little hf manifold and 14b turbo but you will make alot more then 150-ish once you take out some fuelin boost.

 

What percetange of fuel should I take off?