Forced Induction Custom FI Setup Questions

Finally boosted! (with pics)

Thread Tools
 
Search this Thread
 
Old Mar 31, 2005 | 10:41 PM
  #1  
Frogmofo's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 64
Default Finally boosted! (with pics)

I finally finished my set-up on my y8. Setup includes as follows:
Ford T3 60/48
Ghetto D AC Mani
Ghetto D 2.5 AC Downpipe
Ghetto D dumptube
Uberdata
DSM 450's
Tial 38mm
5" JRC FMIC
DSM BOV
Stealthmode oil lines
JC whitney IC pipes

Problems I have run into...
Since I've ran the car with the turbo on, I have noticed lots of white smoke out of the muffler and from the turbo. I expected some from the turbo since I just put the thing in, but the smoke from the exhaust was unbelievable. When I drove her people had to switch lanes to avoid my wrath. This was a test drive with no boost with the IC pipes disconnected. I noticed some leakage from the exhaust housing between the center section and between it and the DP. The oil pressure was also unbelievably high on start up at around 80psi and lower as it warms up.
When I connected the charge pipes I noticed lower oil pressure when cruising and in boost.(now running on my basemap) It was at night and I think there was a lot less smoke coming from the exhaust. The turbo did smoke a lot. I do not have pics of the oil return but I'm pretty sure I need to shorten it and the turbo sits pretty low considering where my pan is tapped. I bought stealthmode's restrictor vavle for the pressure and hope to receive that soon. Any help is appreciated.

Name:  Turbo.jpg
Views: 72
Size:  27.8 KB

Name:  Turbo004.jpg
Views: 34
Size:  32.7 KB

Name:  Turbo002.jpg
Views: 51
Size:  29.7 KB

Ignore the tie-wraps, it's bolted down now
Name:  Turbo003.jpg
Views: 29
Size:  22.6 KB

Old Mar 31, 2005 | 10:53 PM
  #2  
BoosTedZSix's Avatar
3.0 BAR
 
Joined: Jan 2004
Posts: 5,704
Default Re: Finally boosted! (with pics)

very nice! how about a video
Old Mar 31, 2005 | 10:59 PM
  #3  
david_jones001's Avatar
1.0 BAR
 
Joined: Sep 2003
Posts: 600
Default Re: Finally boosted! (with pics)

looks sweet dude, does she kick ***. when does the boost kick in, what rpms
Old Mar 31, 2005 | 11:04 PM
  #4  
Frogmofo's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 64
Default Re: Finally boosted! (with pics)

Originally Posted by david_jones001
looks sweet dude, does she kick ***. when does the boost kick in, what rpms
It starts spoolin at abou 2500-3000 rpms, not sure exactly. I hit full boost at around 3500. I am not completely sure but its sooner than I expected.
Old Mar 31, 2005 | 11:11 PM
  #5  
david_jones001's Avatar
1.0 BAR
 
Joined: Sep 2003
Posts: 600
Default Re: Finally boosted! (with pics)

are u runnin a tuned basemap
Old Mar 31, 2005 | 11:15 PM
  #6  
Frogmofo's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 64
Default Re: Finally boosted! (with pics)

Originally Posted by david_jones001
are u runnin a tuned basemap
Not yet, I plan on using my Zt-2 here soon and do some street tuning myself. Do you know where I could get a tuned basemap for this setup? I might want to try it out before I tune it myself.
Old Mar 31, 2005 | 11:18 PM
  #7  
david_jones001's Avatar
1.0 BAR
 
Joined: Sep 2003
Posts: 600
Default Re: Finally boosted! (with pics)

tranceminster or projteg will do it
Old Mar 31, 2005 | 11:23 PM
  #8  
Frogmofo's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 64
Default Re: Finally boosted! (with pics)

Well I don't need someone to burn me a basemap. I'm running off of a pretty conservative basemap that will atleast let me drive til I decide to tune it for better performance and gas mileage.
Old Mar 31, 2005 | 11:26 PM
  #9  
david_jones001's Avatar
1.0 BAR
 
Joined: Sep 2003
Posts: 600
Default Re: Finally boosted! (with pics)

oh well ---- if u got a nice basemap all ready stick with that until u can street tune it, where are u located
Old Mar 31, 2005 | 11:30 PM
  #10  
Frogmofo's Avatar
Thread Starter
0.5 BAR
 
Joined: Aug 2004
Posts: 64
Default Re: Finally boosted! (with pics)

Midwest City, OK
near Tinker AFB



All times are GMT -5. The time now is 08:17 AM.