http://cgi.ebay.com/ebaymotors/ws/eB...947822522&rd=1

is this the fuel pump id need for turboin my d16z6... im running a 14b 8-10psi... uberdata..


also should i get a fpr? and which one would you recommend..
also what psi should my fuel pressure be at?

 

i dont use a FPR but for a fuel pump thats the one, walbro 255

 

No thats the wrong pump. You want the regular not the high pressure. They make both. The regular one wont ---- up your fuel pressure.

 

you dont need the adj.fpr with uberdata. the stock one is fine.
that's the same pump i got.

 

ok so which is it?? do i get the regular 255lph or the high pressure... im gonna be running 450 correctinject injectors.. uberdata on a d16z6 w/ a 14b and either stock fpr or adj..

not sure if i need it yet.. mixxed reviews on post.. i need deff answers as to what i need if some1 can please help.. thanks

also anything else ill need regaurding fuel?? should i get a gauge so i can see what my fp is at? is the b/m gauge negood?

 

I second this

 

i run a Walbro 255lph HP pump... stock FPR...

also that pump is good for like 500hp

 

... ok again lol thanks for the replys but its still 2 - 2 for hp or regular? ...

im not going for a 500hp build.. just a mild turbo on z6 for now shooting for 200-220hp... maybe later build bottom end ect.. but i think 200-220 is enough for a daily driven civic..

8-10 psi 14b uberdata.. if i can just buy the reg 255 and not need a adj fpr id like to do that...

 

dont know if ne of use ever saw this.. found it searchin around http://www.lightningmotorsports.com/walbro_tech.htm

so mite as well get the hp? im still confused someone has to know...will i need a adj fpr w/ either the hp or the regular 255 using uberdata..

which pump will be best with the setup im using??

 

eh, I wouldnt run 500whp on a walbro

but reguardless both the regular and HP are good pumps, I used the regular in my first crx, and the HP in my current one.