Ok guys here is the planned setup. I have an IHI RHB32 turbo with a 7psi wasegate on it that will be going on a 400cc twin motorcycle motor. The question i have is the carburator set up. I realize that i need to increase the fuel but i have no experience with boosting carb motors. The carbs will be mounted to the intake side of the turbo. I looked for info on this but i cant find ----. about how many jet sizes will i have to go up on every jet to make this run well and not explode. Oh yeah this is going on an ice cart running a cirlce track so WOT all day adn its cold as ---- when running. Thanx for any help

 

search blow through turbo setup on google... id up it to one large carb, if you do that.

 

Oh yeah i forgot about google i spent 4 hours on msn and altavista just today. And i was thinking about just one carb i was looking at them on ebay but i didn't know which size. I was thinking that if the motor is a 400 and i'll be running7 psi then a carb for a 500cc motor would work well...

 

anyone have any other suggestions...

 

Ok so i went to turbo calculator and entered my ---- 400 cc motor at 7 psi is roughly 80cfm at 9000 rpm. Then i entered a 600 cc motor with no boost and this came upe to be nearly the same value.

What do u think about a carb from a 600 cc motor Should work well atleast in my mind

 

Hi guys, i have this duke 390, which i wanted to turbocharge, i know its a lil stressed 375 cc single cylinder motor but is it possible to turbo it ?
if yes was would be the required parts for it ??
also can it be supercharged instead of tubocharging it ??