Does anybody know how to rotate the housing on a TDO-14L? This happen to have only a screw in the middle. Thanx

 

most TDO turbos will have a big ring with a bolt and a lock nut. loosen this. hit the exhaust side with a hammer and rotate.

if you got any problems hit me up, also u got some pictures of that turbo?

 

i've got td04 and you have to remove the clamp and knock the exhaust side off of the center section like shortyz says. you will also have to grind off the alighnment pin so that you can reinstall it/rotate. the compressor should have a lock ring and you need a GOOD pair of ring pliers and lots of patience. this will have an alignment pin as well.