Wastegates n BOV's (What the MM mean, Whats the dif)
Thread Starter
3.0 BAR
Joined: Jul 2004
Posts: 2,251
Wastegates n BOV's (What the MM mean, Whats the dif)
Just looking into external wastegates and BOV's. They have like 38mm 42 mm 50mm
And stuff like that just wonderrin what the difference is and which would be better for which setup. I plan to run 14-16psi if that matters.
Let me know
Thanks
And stuff like that just wonderrin what the difference is and which would be better for which setup. I plan to run 14-16psi if that matters.
Let me know
Thanks
Thread Starter
3.0 BAR
Joined: Jul 2004
Posts: 2,251
Re:Wastegates n BOV's (What the MM mean, Whats the dif)
I know a BOV lets out the boost when you let off the throttle when boost has already been built up.
Dont really know what a wastegate does though.
Is on better than the other? External (always mounted on the manifold right?) or internally inside the turbo
Why would you need a 38mm wastegate as opposed to a 44mm
Dont really know what a wastegate does though.
Is on better than the other? External (always mounted on the manifold right?) or internally inside the turbo
Why would you need a 38mm wastegate as opposed to a 44mm
Guest
Posts: n/a
Re:Wastegates n BOV's (What the MM mean, Whats the dif)
wastegates control boost by allowing exhaust to bypass the turbo, thus creating less boost. The bigger the wastegate, the better it is going to be able to control a big turbo on a high powered motor
0.0 BAR
Joined: Feb 2003
Posts: 0
Re:Wastegates n BOV's (What the MM mean, Whats the dif)
Go internal wastegate (which will probably come on the turbo you get) and spend the money on an electronic boost controller. 
You don't need all that fancy external wastegate stuff until you have $10,000 for the motor.
You don't need all that fancy external wastegate stuff until you have $10,000 for the motor.
