FS: Whole tuning kit!! (wbo2; burner; roms; datalogging; etc
I've got my car somewhat tuned and i just spun a bearing so i need to sell this stuff to get back up and running quick! For sale is all of my equpment i've been using to tune my car for the last few months. Included in this kit is:
-Techedge 2.0 wideband controller with display and bosch lsu sensor + all cables and stuff; unit is barely 2 months old and has seen less than 5 hours in car run time; works great - I used the built in datalogging feature to do all of my tuning on an obd0 PS9 ECU.
-EPROMER-5 eprom burner with power supply; cables and ZIF socket
-about 20 27c256 Eprom's (most of these are useless but a few still work; i bought a huge lot in bulk for cheap and.... well you get what you pay for) but there are enough here to burn; datalog; tune; reburn and try again.
-2 EPROM sockets
-2 74hc373 chips; you add whatver else you need obd1 folks
-1x Max232 TTL-RS232 converter for datalogging (just the chip and caps)
-Homemade eprom eraser - 6" UV germicidal lamp; will erase up to 10 eproms at a time - manual timer included - will have to add your own 6v power supply or run off 4 AA batteries.
Software for all of this above can be downloaded from one of the many tech edge support sites and off the ustr.net site for the EPROMER-5. I would like $450 shipped for all of this in the 48 states but i will ship elsewhere for whatever the difference is in shipping. I have 60+ feedback on ebay (username TSAudio); no negative; i have heatware (don't use it much; username ComputerJLT) and i have traded with a few people here on honda-tech. Email me (ComputerJLT @ Yahoo.com) or pm or aim me (HondaOfFury) if you need more info.
here is a picture; not all the rom's are present obviously.

i'm also looking for a D16Z6 longblock with intake manifold and a si 5spd transmission out of a ef/crx if you have that i'd be willing to work out a trade.
-Techedge 2.0 wideband controller with display and bosch lsu sensor + all cables and stuff; unit is barely 2 months old and has seen less than 5 hours in car run time; works great - I used the built in datalogging feature to do all of my tuning on an obd0 PS9 ECU.
-EPROMER-5 eprom burner with power supply; cables and ZIF socket
-about 20 27c256 Eprom's (most of these are useless but a few still work; i bought a huge lot in bulk for cheap and.... well you get what you pay for) but there are enough here to burn; datalog; tune; reburn and try again.
-2 EPROM sockets
-2 74hc373 chips; you add whatver else you need obd1 folks
-1x Max232 TTL-RS232 converter for datalogging (just the chip and caps)
-Homemade eprom eraser - 6" UV germicidal lamp; will erase up to 10 eproms at a time - manual timer included - will have to add your own 6v power supply or run off 4 AA batteries.
Software for all of this above can be downloaded from one of the many tech edge support sites and off the ustr.net site for the EPROMER-5. I would like $450 shipped for all of this in the 48 states but i will ship elsewhere for whatever the difference is in shipping. I have 60+ feedback on ebay (username TSAudio); no negative; i have heatware (don't use it much; username ComputerJLT) and i have traded with a few people here on honda-tech. Email me (ComputerJLT @ Yahoo.com) or pm or aim me (HondaOfFury) if you need more info.
here is a picture; not all the rom's are present obviously.

i'm also looking for a D16Z6 longblock with intake manifold and a si 5spd transmission out of a ef/crx if you have that i'd be willing to work out a trade.
Thread
Thread Starter
Forum
Replies
Last Post
HondaTuner
Wanted
8
Jun 28, 2006 05:36 PM
fastcivicboy
Turbo Parts For Sale
27
Oct 22, 2005 03:05 PM



