I'm new to the forums and have tried to search to answer my questions, and have had no luck.
I made a custom turbo setup for my H22 with a T04 turbo, GReddy Type S BOV, a Tial Wastegate, and a manual boost controller. I need to know where to correctly hook up the vacuum/boost lines from each of the components. Can anyone help me with this? (i.e. where do the two ports on the BOV go?, where do the two ports on the wastegate go?, and which line does the boost controller go to?)

Thanks

 

Line from port on compressor housing to the wastegate port

T the line you used for your wastegate for the second smaller port on your Type S

 

 

As far as vacuum goes, connect anywhere, most people tap the FPR vacuum. I have a Type S on the civic, you connect the vacuum to the bigger niple, the other one that points down stays open.

 

Ok cool I did that. So on my dual port wastegate, the upper port is the one from the compressor housing?

Thanks

 

oh man are you sure you want to turbo ? i think you should do some more research on how a turbo works and side affects..are you installing it yourself? or do you have an experianced helper.

 

No problem, glad to help, but I don't know about the wastegate, I'm using an internal gate.