So, I've run into one hell of a problem. The Mani I have, puts the turbo right in the middle of the a/c line running up through the radiator. that means i had to pull BOTH fans to fit the turbo. I have some 2 1/2 pushers, but how the ---- do i mount em, and where?

 

pusher fans are to mounted in front of the raditor, the fans should have came with some type of mounting hardware. I would like to see some pic's of your setup.

 

I know they're supposed to be in front. I have my Condeser core in front of my radiator, an oil cooler and A/C line in front of that, then i have maybe an inch of clearance till i hit the middle support.

 

Not sure if it helps, but you can bend that a/c line in front of the rad. I also tried putting the stock a/c fan infront, but it won't fit, so I'm going to try to bend the metal fan supports to make it fit.
How thick are the fans you have? I too would like to see pics of your setup.

 

I just said ---- it, took my grinder and cut that little hood latch reinforcement bar off. Fits great now. The hood latch is bolted to the frame anyway.

 

i am in the process of building my turboed teg, and am having the same problems. PLease post some pics

 

 

Nice streetkings. You'll be fine with that setup. I was going to cut that hood latch support bar out of mine too so my pusher fans would fit, but with the front end conversion the hoodlatch is bolted to that part. But in your case it makes it easier to cut out. Actually I noticed that you drilled out the spot welds rather than going ghetto style and sawzalling that thing to hell. nice job, looks cleaner.

 

that's some other guy's picture....i just copied him :P

 

Oh so your's is the ghettostyle j/k