i'm in the process of doing the conversion i did all the wiring already..but it didn't start up..it cranks..but didn't start..seems like theres no spark..how can you test the injectors to see if they've got power...and does it matter how you put the injector clips in?..do they have to be in the same order they originaly were..because i just cut off 4 injector clips off of a 90 integra..and hooked them up to the zc injectors..but not in any particular order...help me out if you can..thanks

 

oh yea to make sure...
in what order do the injectors run?
from right to left, (from dist to cam gears)
if looking from front
of car... is it 4 3 2 1? let me know
thanks

 

I went by camgear to distributor -> 1 2 3 4
i believe i have all the same color wires on the left side (looking at engine from front) of the injector clips.

this site has a diagram that's pretty helpful.
http://www.fourthgenhatch.com/mpfi.html

http://www.bladesilver.net/crx/projects.html#MPFI

 

try flipping the 2 white wires on the dizzy. One is white the other is white with a red stripe. usually the stripe wears off flip the 2 wires try again. I believe the injectors fire the same as the motor does.

 

thanks guys..yea thats the site i used..i haven' switched the 2 white wire's on the dizzy yet...do i switch the one sensor on the dist also?...since one of the two sensors on the dx wiring harness doesn't fit snug with the one on the dist...thanks again hopefuly i'll get this damn thing running..i hate workin on cars in the cold.

 

when I did the convo I had to get a different dizzy plug for it to work since mine was square and the one on the dizzy was round, did you have the same problem?
double check your wiring, I can't think of anything you did wrong from what you've said so far.

 

yea one of the plugs on the dizzy doesn't fit correctly..i'll try to swap them out..with the old dx
one...hopefuly it'll start..thanks..

 

Like everyone said, try switching the 2 white wires. I did a mpfi swap for my friend 3 weeks ago and had the same problem. There's one white wire and one that looks white but I think it's faded and it was supposed to be "peach" color. Try that.

Stan