which ecu would be the best for my 1990 hatch with zc swap ecu is fried i think.

 

pm6 would be the best but you can get pg7s for cheaper

 

do you know best place to purchase

 

The best ecu to buy for your dohc zc is a pm7 which is the ecu that came stock. Unfortunately, they aren't that easy to find. I suggest looking on ebay. Make sure you get a pm7 for a standard and not an automatic. Additionally, the pg7 is the next best thing to a PM7 but it will make your engine run rich. A good resource on the subject is www.thezcr.com.

 

The pm6 will work just as well, but is tuned slightly less aggressively: it's set up for a single overhead cam. I'm ASSUMING you mean the dual cam ZC. A pm6 will run fine, and if you really want to regain what little power you lose, you'd want to re-tune it anyway. The pm6 is easier to work with than the pm7, so you're better off with it when you end up retuning again. Check pgmfi.org for more info as well.

 

thanks for the help everyone

 

Are you interested in buying a pm7?

 

yes pm me with price if you have one

 

I can't pm on here(not enough posts yet). Are you a member on thezcresource? I have the same id on there. Or you can email me at fredzhoz@yahoo dot com.

 

i have emailed you