Should I waste 30 bucks on a gauge pod to mount my gauges... or should I be ghetto and come up with cheaper way to do it...

Just look at my name.. and you tell me...

Well i found this really interesting way to mount my gauges.. after Eletrical tape and zip-ties failed...

You get 1 gauge... break those stupid fastening screws off the back of it.

Get 1 2.5in (dia) Hose clamp, Drill a small hole big enough for a screw to fit through...

Look for an area to mount your gauge...

Proceed to screw in hose clamp....

Once hose clamp is secured, place gauge in clamp and tighten...

and you have mounted a gauge securly, reliably, and cheaply, for less than a buck.

will post pic tommorow....

 

i'd get the damn pod but thats just me.

 

If you don't mind the wires showing like spaghetti and you don't care how it looks then do it the ghetto way. Some of those guage pods can be a bitch to install anyway. :P

 

1 word 2 sylabels... Wire-Loom

Or is it two words?

Yeah my neighbor bought one on ebay... and it didnt have screws or anything... just some shitty double sided tape.... it fell off one day when it got real hot...

 

gheto rulez
you guyz should see my ecu slidinr right/left on the passenge footrest.
its now 7 month that iam fixing it back

 

if you have a crx,that cubby hole below your radio can be used. Take a sheet of alumanim or have ever you spell it nd cut it the size from the bottom of you radio to the bottom of the cubby hole then screw it on. You might have to cut the cubby out so the gauges will fit. To make it look cooler use hex head screws. You get about three gauges.

 

where is the cd player gonna go ? glove box ?

 

I just hate shoving all the wires to go through the A pillar. Its a pain putting the bitch back on because then all the wires wanna come out.

 

tape em to the a-pillar then put the cover on