I have heard that 88 rx7 injectors work for boosted civics i was just wondering if the injectors clips are the same as obd1 civic clips and if there are other injectors that are oem on other cars that do not require a resistor boxes ie high impedence injectors with a high cc rating thanks

 

no help?

 

just get eclipse injectors and use eclipse clips with a resistor box

 

i do not want to hack my wiring i dont want to run a resistor box either

 

its not hacking if you do a decent job and solder the connections. im sorry but if you dont want to modify the existing pieces of your car then dont try to turbo it. do you consider chipping the ecu "hacking" it up? becuase when dhipping the ecu you are just undoing a connection and reconnecting something else just like you would be doing with your injector clips.i dont know of any drop in oem high cc in jectors that are low impediance.
basically what im saying is that soemtimes you have to do modifications to make things work. if you are going to go cheap then you need to modify stuff. if you want direct replacements then you need to buy some rc injectors or presicion injectors which i believe you still need to use their clips

 

If i do remember correctly..... obd-1 injectors per say 95 stock civic injectors.... are high impedence.... i dont mind modifying my car i just dont want to mess with the injector wiring. I would like to just run 88 rx7 injectors. I have found a few websites that are saying that they are 460cc injectors with an offset connector and they are high impedance. such as:
Stock fc3s RX7 injectors......... - Car Forums and Automotive Chat
MX-5 Miata Forum - rx-7 injector problem



I have also heard the the square clips will clip into stock injector clips. I dont mind modifying my car but wats wrong with being a little bit different than everyone else that just throws a set of crank walking dsm's in there civic and runs a resistor box. I dont want them i would rather have a clean setup running saturated injectors.

 

ok i was mistaken i thought they were low impeidance for all years, but the dsm injectors are better because the rx7 injectors are all known to leak the vast majority of them leak causing hard starting and all the other accociated bullshit that goes along with a flooded engine. now if you already have them go ahead and use them maybe consider getting them rebuilt becuase if they dont leak now they are going to eventually plus a set of new cleaned injectors are always a good start to a decent fuel system, but if you dont have them just go with the dsm injectors they are cheaper. the reason why everyone else uses them is becuase they are proven to work great