Re:ZC Very hard to start when cold
 

what ones should i have gotten i got the ones for a stock integra 89........This problem is starting to piss me off sooooooo bad. I know it is something simple and probably costs like 5 bucks but i am spending alot fixing everything else...i guess i have a new car when i am done haha. Could this be a bad PCV valve?

Re:ZC Very hard to start when cold
 

does it have less power then before you change the timing belt don? it sounds to me like the timing is off (the cam timing)put the crank to TDC and make sure the cams are flat.

Re:ZC Very hard to start when cold
 

has the same power as befor. wanan help me do whateever that means???

Re:ZC Very hard to start when cold
 

Just make sure the lines on the cam gears are even and the "up" part is facing up in the same direction. They won't be "perfectly up" but you should be able to tell if they are off. They will kinda angle in at each other.

Another way(the better way)to tell is to take the valve coover off and take a look. The cams have alignment holes in them so that makes it easy. Set the crank to TDC and make sure you can stick a pin in the alignment holes on the cams. I would take a picture for you if my valve cover was off.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:ZC Very hard to start when cold
 

hey man whats up. sounds like the same problim some one eles i know has. sounds like leaking injectors. so when the car sits it just drips fuel in to the combustion chamber. just a idea along with all the rest.

sorry for speling i am tipsy and dont care.

Re:ZC Very hard to start when cold
 

ok updated list of crap i have tried now.

Replaced alot of visual wires int he engine bay with corrosion on them, replaced both batter cables and all lines assosiated with batter and made that battery look like new, gunked out the engine bay just for good measure. put a new pg7 ecu in that bitch. Problem seems to have gone away, not sure if it will come back or not we will see later today i guess....There was ALOT of corrsion on come of the wires though, so maybes i was getting a bad connection somewhere...i replaced/and or cleaned up alot of them!

Re:ZC Very hard to start when cold
 

well i just now read this thread. At first I was going to say something along the lines of timing but it really sounded like it was flooding out. So poor ignition would equal flooding.

Re:ZC Very hard to start when cold
 

SO DOES THAT MEAN THE CORROSION COULD HAVE BEEN DOING IT? SORRY FOR THE CAPS IM AT WORK AND HAVE TO USE THEM

Re:ZC Very hard to start when cold
 

yes it could have caused that. more corrosion = more resistance = less current = crappier spark ;)