ZC Tranny, I-shaft, .. axles?

Reply Subscribe

Thread Tools

Search this Thread

07-14-2004, 05:19 PM

88crxSi

3.0 BAR

Thread Starter

Join Date: Feb 2003

Posts: 9,089

ZC Tranny, I-shaft, .. axles?

Which axles would give me close to ideal fitment using a ZC tranny w/ I-shaft?

in a 88 CRX Si.

thx

07-14-2004, 11:52 PM

Carnesd

1.5 BAR

Join Date: Jun 2003

Posts: 911

Re:ZC Tranny, I-shaft, .. axles?

two short civic axles with 90-93 teg inner joints.
Thats supposed to be the best but I used 90-93 teg axles and removed the dust shield in the hub.

07-15-2004, 06:15 AM

88crxSi

3.0 BAR

Thread Starter

Join Date: Feb 2003

Posts: 9,089

Re:ZC Tranny, I-shaft, .. axles?

Quote:

Originally Posted by 90zcrex

two short civic axles with 90-93 teg inner joints.
Thats supposed to be the best but I used 90-93 teg axles and removed the dust shield in the hub.

thats what i've been hearing. use 90-93 teg axles w/ the ZC i-shaft, but some people say you have to remove the dust sheild in the hub and some say you don't.

07-15-2004, 08:12 AM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:ZC Tranny, I-shaft, .. axles?

Remove the dust sheild. I believe hasport had a write up on this issue years ago.

07-15-2004, 12:58 PM

Carnesd

1.5 BAR

Join Date: Jun 2003

Posts: 911

Re:ZC Tranny, I-shaft, .. axles?

Quote:

Originally Posted by crx88Si

Quote:

Originally Posted by 90zcrex

two short civic axles with 90-93 teg inner joints.
Thats supposed to be the best but I used 90-93 teg axles and removed the dust shield in the hub.

thats what i've been hearing. use 90-93 teg axles w/ the ZC i-shaft, but some people say you have to remove the dust sheild in the hub and some say you don't.

I really don't know if you do or don't, but I did and didn't have any problems.