ZC swap question
 

In a few weeks I'm probably going to be swapping a zc into my gf's 90 dx hatch. Most of the write-ups are for dx to zc....but I have a rywire dx to mpfi harness. Now heres where it getting confusing (at least for me). This rywire harness has round Si plugs and i know the jdm distributor has square plugs. Does the USDM D16a1 distributor use round plugs that will work with this harness??? if so that would be great. The distributor is the only thing I haven't got yet so I can get whatever distributor I need. I have a chipped pm6 I was going to run a stock pm7 map on. As always any help would be appreciated. Thanks in advanced

Re: ZC swap question
 

what i did on mine i cut the round conector and did the square one the only two wires i didnt hook up was the two blue wire those to wire go the crank angle sensor in front of the dizzy