HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - zc swap (https://www.homemadeturbo.com/hybrid-tech-8/zc-swap-42353/)

mopbucket

07-07-2005 06:57 PM

zc swap

i got an 88 crx si D16a6 and im going to pull it out and build it i got an zc to put in it but will the stock si mounts work on the zc or do i need some other mounts also will the zc motor harness plug in to car harness and will it run off the pm6 if not i got the zc ecu?

Project CRXtacy

07-08-2005 02:09 AM

Re: zc swap

Quote:

Originally Posted by mopbucket

single or dual cam ?

yes it will run off the pm6 and harness fine.

mopbucket

07-08-2005 09:18 PM

Re: zc swap

dual cam

Semnos

07-09-2005 09:30 AM

Re: zc swap

It will drop in with D16A6 mounts...and the harnass will fit.
It's basically the same block from the outside....

valentino

07-10-2005 10:25 AM

Re: zc swap

there are 2 wires you will need to change out, but its a very easy swap. my girlfriend and i did it in about 6 hours.

All times are GMT -5. The time now is 08:59 AM.