HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - ZC Questions (https://www.homemadeturbo.com/hybrid-tech-8/zc-questions-32449/)

Quote:

Originally Posted by CRX-ZC

Quote:

Originally Posted by AbaZ

Any D-series rods will work.
Parts are a mix bread between 88-89 d16a1 and 88-91 D16a6.

Are you sure about rods?
DOHC ZC engine is marked as D16A9, example;
https://www.homemadeturbo.com/turbo_...gine-bay_P.jpg

D16A6 is SOHC engine;
https://www.homemadeturbo.com/turbo_...gine-bay_P.jpg

i took the picture, D16A6 bearings were from Honda CRX Si - american model, and D16A9 bearing were from european Honda CRX 1.6i 16V;

http://www2.arnes.si/~mjereb2/IMG_0883.JPG

So don't get fooled, bearings are not the same size!

Thats bullshit, because my built ZC (in the picture above) I used PM6 (d16a6) Crx SI main bearings, and rod bearings.

I think d16a9's are different than ZC's.

Quote:

Thats bullshit, because my built ZC (in the picture above) I used PM6 (d16a6) Crx SI main bearings, and rod bearings.

I think d16a9's are different than ZC's.

Well, what's the mark on your engine block? Isn't it D16A9? It looks just like mine, D16A9.

http://www2.arnes.si/~mjereb2/backin.JPG