Xgenturbo

Can anyone provide me with some info on the ZC, i cant seem to find anything, i need the timing setup and the head torque down diagrams.

Semnos

Torque is...toqrue down to 22 lb.ft in the first step and than 49 lb.ft in the and and final step. Sequence is the two middle bolts first then the two on the left next to the middle then the two on the right next to the middle then the two on the far left then the two on the far right.
The timing..well you need to alligna the camchafts to the head there is a marking on each cam, they should be level with the block and the up arrows, or the UP marks on the cams should be showing up...the crankshaft has three markings next to each other and one on the far right from the 3. the one on the far right from the other three markings is the TDC marking you should allign it with the pointer on the timing belt cover. The other three markings are the BTDC markings the middle one is specified as the red marking and on the SOHC ZC it's set at 18 degree BTDC and on the DOHC ZC it's set at 16 degree BTDC. The two markings next to it are 2 degree advance (marking on the left) and 2 degree retard(marking in the right).These markings are for the ignition timing..to advance rotate the dizzy towards the firewall and to retard rotate away from the firewall.

I got this from the Euro CRX Manual..I hope it helps
The 3 marki

Xgenturbo

is there any way you can scan that info from the manual and email it to me? does anyone else have actual pictures? i am a very visual person, i can only learn something if it is shown to me once, and then it sticks with me forever.

Honda16hb

check out www.thezcr.com for lots of zc info

88b16civic

Heres a ZC only scanned online manual.

http://www.thezcr.com/html/zcbook.php

and here is the European spec sheet for 2g CRX and 4-5g civics. Pretty complete.

http://pgmfi.org/resources/documentation/

Xgenturbo

thanks alot guys