HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   ZC engine problem (https://www.homemadeturbo.com/hybrid-tech-8/zc-engine-problem-10783/)

abakedpotato 10-16-2003 10:26 PM

ZC engine problem
 
alright, this is a crazy combo, i know. i have a zc in my 92 civic hatch. it has a dc sports header, adjustable cam gears, external crane ignition, aftermarket clutch, magnaflow exhaust 2.25 in. with no cat currently. i'm running a dx ecu.
from the start it hasn't felt as fast as i thought it should be. it pulls hard at 5k to 7k but seems to not have it all below that. either way, at the track it pulled a 17 sec. flat. i'm definately not a pro. it was my first time but from what i've heard, the zc runs mid to 15's in a crx so i would think a high 15 with all the mods was probable. any ideas? ???

Dr.Boost 10-16-2003 10:35 PM

Re:ZC engine problem
 
Well, a CRX is a bit lighter than a hatch. Also, those "mods" you listed are probably good for about 5-8 WHP so you shouldn't expect too much out of it. That ECU might be holding you back a bit as well.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Semnos 10-17-2003 04:45 AM

Re:ZC engine problem
 
DX ECU :o
Damnnn that thing isn't giving you nearly as much fuel as you need and the ignition maps aren't helping either.
Get at least a PG7 or something like that.

Turbo90Accord4DR 10-17-2003 06:07 AM

Re:ZC engine problem
 

Originally Posted by Semnos
DX ECU :o
Damnnn that thing isn't giving you nearly as much fuel as you need and the ignition maps aren't helping either.
Get at least a PG7 or something like that.

is a pg7 obd1?

Semnos 10-17-2003 06:25 AM

Re:ZC engine problem
 
I don't think so....I don't know if it would work though it's from the 1st gen teg.

88crxSi 10-17-2003 07:40 AM

Re:ZC engine problem
 
is this a sohc ZC or the DOHC ZC? Maybe a 92-93 ls ecu wil do u some good :)

ShadowRex 10-17-2003 11:35 PM

Re:ZC engine problem
 
use the obd1 teg ecu

Honda16hb 10-17-2003 11:58 PM

Re:ZC engine problem
 
how does that external ignition work? do you have any pictures? how much did it cost? how do you change the timing?

ya, probably the obd1 teg ecu. answer my questions please.

OnYx 10-18-2003 02:49 AM

Re:ZC engine problem
 
The OBD1 teg ECU will flood the engien with too much fuel. The ECU is a PR4 and is ment for a 1.8 DOHC non-vtec not a 1.6 ZC motor. Is this the DOHC ZC or the SOHC ZC? If its a DOHC ZC i would go ahead and chip the DX ECU but that would be why it doent run that well, the ECU is starving your fuel. Are you pinging at all?

ProzacOverdose 10-19-2003 03:07 AM

Re:ZC engine problem
 
sounds to me like teh ecu is kickin your motor's ass. i too had that weak (if its a dohc) 94 zc dohc in my 92 hatch. and trust me...there is an ecu for it...it came in some civic eg5 esi from japan. there is also an optional lsd w/ better ratio trans. but that ecu took me 6 months to get and it wasnt worth it at all. the ecu is for a 5 speed...jdm dohc zc P29. anyother will work..but this is the correct one. it ran pretty good with my 94 ls ecu. like most...you can smell the gas fumes...but it runs fine. i like this better then the z6 but they are weak. you'll have a better time focusing your money on a z6....good luck

oh yeah...i also ran a dx ecu for like....1 trip down the block...it kills the power....atleast go with an LS...


All times are GMT -5. The time now is 03:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands