zc distributor hook-up on 0bd1 wiring
 

yea, i dont understand how to hook up the zc distributor to my eg 0bd1 wiring harness, plugs dont fit and wires on the plug dont match up either, which color wire goes to which....help.

Re:zc distributor hook-up on 0bd1 wiring
 

use an obd 1 dizzt with an obd1 setup....

Re:zc distributor hook-up on 0bd1 wiring
 

sorry but i want information on someone who actually knows how to do it or have done it before

Re:zc distributor hook-up on 0bd1 wiring
 

i have yet to see anyone to get an OBD 0 dizzy to work on an OBD 1 car. sorry.. ::)

Re:zc distributor hook-up on 0bd1 wiring
 

many people have swapped b16a's in their eg's. 0bd1 wiring to 0bd0 disssss

Re:zc distributor hook-up on 0bd1 wiring
 

I'm the one who's helping him on the swap. I would use the obd1 d-series, but we tried it today and the mounting points on the leg of the d15b7 dizzy dont line with the zc motor. The zc dizzy has one hella longer leg base. So is there is any other way around this. I've seen zc swaps in the 92-95 civics but i really havent pay any attention to what dizzy they were using. Maybe they made some kind of bracket so the obd1 dizzy would bolt right up.

Re:zc distributor hook-up on 0bd1 wiring
 

take a dremmel and a metal cutting bit and round out one of the legs so the bolt fits. obd1 and 2 stuff doesnt like obd 0. sensors in the dizzy are diffrent.

Re:zc distributor hook-up on 0bd1 wiring
 

alright kool. I might check it out. they're pretty close to lining up, but if i remember right, only one leg actually came close to mounting hole. Do you think it would be okay with just one bolt holding? Oh well I'll make it happen lol thanks for the suggestion.

Re:zc distributor hook-up on 0bd1 wiring
 

happens all the time. use a y8 dizzy, its the same bolt patern as the a6 i belive

Re:zc distributor hook-up on 0bd1 wiring
 

If you're using a OBD1 ecu ..use a OBD1 distributor....make a bracket or something...I'm using a PM6 D16A6 Dizzy on a 1st gen ZC ...made a bracket of some sort....it's only bolted on one hole ::)