zc cv shafts
 

what cvs do i need to buy so that my zc can be hooked to my hf hubs i tried integra ones but they dont fit

Re: zc cv shafts
 

use stock shafts for your car

Re: zc cv shafts
 

you got a dohc zc tranny ??

Re: zc cv shafts
 

yah its the dohc i tried integ cvs but the splines on the cv were way to big for my hubs so should i look for hf shafts

Re: zc cv shafts
 

no he said what tranny are u using?
if its the zc engine and the d series engine you use stock shafys

Re: zc cv shafts
 

as far as i know i think it is a zc tranny because every time i rip tire both wheels spin and as far as i know the hf tranny didnt come with lsd and i didnt do the swap it was done befor i got the car...but is there something on the tranny that would indicate what it is

Re: zc cv shafts
 

just go buy a shaft for your car tommorow and if it works use tem , if it doesnt the return it

Re: zc cv shafts
 

yah thats what im going to have to do ill call around and see if they have the hf shafts

Re: zc cv shafts
 

if its a dohc zc tranny you have to use integra axels with either dx or si front hubs as hf's are the smallest of the group and if you are using any d-series tranny you use stock axels for your car

Re: zc cv shafts
 

if it is the zc tranny there will be half shafts on the driver side. if it is a d-series tranny there will just be one axel going all the way from the hub to the tranny

Re: zc cv shafts
 

yah its got the half shaft i order hf axles for it i tried them on both sides and they seem to fit the splines ok

Re: zc cv shafts
 

there is no way this is true

Re: zc cv shafts
 

its pretty fucked up but its true and also the intermedate shaft is a female not a male end

Re: zc cv shafts
 

the intermediate shaft is supposed to be female.. and hf axels might fit your hubs but there is no way they fit to the input on the tranny and intermediate shaft

Re: zc cv shafts
 

well i tried them and ithey slid right in so maybe its not a zc trany