Z6 Y8 block timing question?
 

My friend DRAIL thats a member here just found out that his Z6 block is junk per the main journals. He has a Y8 in his house but wants to know what to do with the swap. He wants to run th Z6 head and electonics with the Y8 block. What cam gear and gear set does he need to run and what setting. We read that the settings are different on the timing. The block is fully built with Cp pistons and Eagle rods with Ferrea stainless valves and skunk2 springs with stock retainers. So what has to be done to keep the oil dip stick too. Different main seals have to be swapped or ok? This is a Z6/Y8 with a Holset H1C turbo on crome pro.

Helpful and true info will be greatly appreciated

Re: Z6 Y8 block timing question?
 

Thanks for asking the questions since I'm to cheap to ask myself O0

Re: Z6 Y8 block timing question?
 

No problem thanks for helping to pull the pasenger side axle out since I'm too much of a ----- to get it out myslf

Re: Z6 Y8 block timing question?
 

Come on guys we need some single slammer help

Re: Z6 Y8 block timing question?
 

The timing is different in the cam.
You can run the y8 block and the d16z6
head with no timing issues.The seals
don't need swapping.the dip stick
on the y8 is on the oil pump.So
unless you swap oil pumps their
won't be a problem.

Re: Z6 Y8 block timing question?
 

What about the z6 crank? Will it fit in the Y8 block?

Re: Z6 Y8 block timing question?
 

Yes it will.That is what i did z6 crank in a y8 block.Since the y8 crank seems too be crap.

Re: Z6 Y8 block timing question?
 

I've read that the y8 sleeves are stronger but i've also read z6 sleeves are stronger. Any opinions?

Re: Z6 Y8 block timing question?
 

Who cares if you cant find a good block thats in spec, what now three blocks are no good on the mains/crank diameters.
Anyone have a good block for this unlucky FUCKER