i am thinking about buying my friends d16z6 to swap into my 89 crx HF . i was wondering what i need to do this swap.

so far i know i need a new tranny( non hydro)
ecu
axles
hubs??


what else is required for this swap??



i sound like a newb i know

any and all help is appriciated

 

depends on the condition and completeness of the Z6 you are getting and how you want to do it

if you want to stay OBD0 you just bolt it in using the HF/Si intake and Distributor the distributor mounting is hacky but it works

you need to put the drivers side HF mount on the Z6

you can activate VTEC with a toggle switch or an rpm activated switch

if you want to do it "the right way" in my opinion and go OBD1

you need a P28
you need a Z6 distributor
you need a 4 wire O2
you need a OBD0 to OBD1 conversion harness
you need to wire for VTEC
you need a OBD0 to OBD1 distributor conversion harness
rywire has all three for like 190 or you can do the wiring yourself

let me know if you have any more questions

 

http://hybrid2.honda-perf.org/tech/sohcvtec.html

read its all there

 

thanks for the help

 

no problem, i am doing mine soon so let me know if you have any more questions