Z6 Head damage
1 Attachment(s)
Attachment 10014
I was going to install my Zex cam and noticed this when I removed the stock Z6 cam. :7 |
Re: Z6 Head damage
ouchie!
|
Re: Z6 Head damage
I have a cheap d16z6 head. Little bit of surface rust from sitting on the shelf forever. Its just the head which from the looks of it is all you need. Cam caps,valvetrain all there.50+shipping its yours
|
Re: Z6 Head damage
I appreciate that Chris, I was going to ask you if you had any spare cores, then I remembered that this head was ported. :'(
|
Re: Z6 Head damage
worst case if the grooves are to deep to get honed out, pm me
|
Re: Z6 Head damage
2 Attachment(s)
|
Re: Z6 Head damage
Originally Posted by chris
worst case if the grooves are to deep to get honed out, pm me
|
Re: Z6 Head damage
What are your thoughts on the possible cause? Oil pump FTL?
|
Re: Z6 Head damage
The cam caps were not mismatched and this is the second time that this has happened. The other time it happened the cam seized and sheared the cam gear off.
So this head is a different one but the same problem, Im thinking that the egay oil pump Im using is not uo to par. I may just get an OEM pump and modify it to Endyn write up specs. |
Re: Z6 Head damage
Oem pump for the win. Was the damage on the same cylinder before?
|
All times are GMT -5. The time now is 09:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands