Z6 dizzy question
When you do a z6 swap into an ef, do you have to use and obd-1 dizzy or can you use an A6 dizzy?
thanks |
Re: Z6 dizzy question
what ecu you using?
are u going to convert to obd1 or stay obd0? |
Re: Z6 dizzy question
Staying obd-0
|
Re: Z6 dizzy question
then you have to use an obd-0 dist, which none match the z6 bolt pattern nicely..
imo, i would go obd1 using a p28 w/ z6 dist and a obd0-1 harness. might cost more and involve a little more work (ie o2 sensor etc) but it would run that much better |
Re: Z6 dizzy question
Originally Posted by crx88Si
then you have to use an obd-0 dist, which none match the z6 bolt pattern nicely..
imo, i would go obd1 using a p28 w/ z6 dist and a obd0-1 harness. might cost more and involve a little more work (ie o2 sensor etc) but it would run that much better Yuppers but if you do the a6 dist you gotta hack up the 2 front bolts back one doesnt have a chance of mounting up |
Re: Z6 dizzy question
Thanks guys, also will the ignition timing be off at all since the dizzy doens't line up right?
|
All times are GMT -5. The time now is 06:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands