y7 in the an 88 crx
 

will i have to convert to obd1 i have the d15b2 in it now what all will need to be dont can i just use the intake manifold form my d15b2 ?

Re: y7 in the an 88 crx
 

Yeah, you can just throw the DPFI on it and it'll run fine the distributor also bolts to the head, theres the radiator fan thermoswitch on the back of the block on the d15, and on the Y7 its on the thermostat neck but i just put mine on a switch, it'll be torquey too.

Re: y7 in the an 88 crx
 

a d16y7 is an obd2 motor if im correct. so just dropping it in an 88 rex it will not bolt and go. youll need an obd0 dizzy. and why stay dpfi. swap to the mpfi and gain some more power, i swear if you put on that dpfi and not go mpfi and switch to either obd1 or stay obd0 i will personally come and kick you in the nuts because you have no right in being here. i swapped from dpfi to mpfi as soon as i found this site in hopes of turboing my hatch. now im just an installition away.....

Re: y7 in the an 88 crx
 

y7 always seemed more low end than any other sohc

Re: y7 in the an 88 crx
 

problem doesn't have all the money to do all that ----. as far as the swap it will go in and he can put all his dpfi crap on t no problem

Re: y7 in the an 88 crx
 

but with a dpfi manifold on it?

Re: y7 in the an 88 crx
 

who knows



will have more then a d15

Re: y7 in the an 88 crx
 

i think op = failure.............. ;D

Re: y7 in the an 88 crx
 

My Y7 is OBD0 it works with perfection Ive done it dont tell me the ---- dont work. And the DPFI will run just fine cause the ports on the Y7 head are just as big as the DPFI mani. ANd as Ive stated almost everything from the D15 will bolt on the Y7, driver side motor mount, dizzy, alternator bracket. If you need more info lemme know.

Re: y7 in the an 88 crx
 

why not just convert to mpfi??
its easier to upgrade from there and not hard to do
i could spin 2-3rd when i had a y7 in my ef lol, vx rims ftw