Re:WTF is wrong with the CRX??? Dyno PIC
 

I´ve used the camgears ajutement and the best I could do was 135 Whp. Crx88si about the "old setup" program, thats what I think its ------- up everything cause I don´t know were did he got it and it was installed before the current setup (without the cams, flywhell etc) and the car was running great. I don´t think its the timing in the cams... I almost could bet that its the ECU, I just wanted you guys opinion cause you´r more experient and so on :P I´ve told the guy to bring his Original ECU to give it a try, it doesn´t mean it will run good (I know it won´t) bu its just to look at some diferences and if it is i´ll have someone make a new costum map for him.

(I have all the tools to burn chips and ---- but I dont have experience yet to tune maps and still waiting for my wideband) :-\

Thanks guys!

Here´s some pics

http://www.pix8.net/pro/pic/233fe76K/151845.jpg
http://www.pix8.net/pro/pic/233fe76K/151846.jpg
http://www.pix8.net/pro/pic/233fe76K/151847.jpg

Re:WTF is wrong with the CRX??? Dyno PIC
 

Does he have a adjustable fpr. Tune the old school way reading plugs. Not the best but it works. Turn up the fuel and see what happens.

Re:WTF is wrong with the CRX??? Dyno PIC
 

I´ll try that and keep you posted. thanks guys.

Re:WTF is wrong with the CRX??? Dyno PIC
 

its the spoiler. the car doesnt like it so it wont run right. its the cars way of giving him the finger :P.

Re:WTF is wrong with the CRX??? Dyno PIC
 

maybe the "port & polished" head is the problem. or maybe somebody ripped him off and sold him stock cams instead of stage 3's... or maybe the engine is a piece of poo poo...

Re:WTF is wrong with the CRX??? Dyno PIC
 

Nop. The port and polish was made by us and its been done several times and worked real well. The cams were bought from omnipower and the are very diferent than the stock ones. The engine got all new bearings, new head gasket and several other stuff. That´s not the problem for sure.