Woud this work??
12-02-2005, 03:40 PM
#1
0.5 BAR
Thread Starter
Join Date: Nov 2005
Posts: 74
Woud this work??
I'm looking to maybe buy some Mahle pistons for my H22. Now I know that the bore is 87mm, but would it work if I bought some 87.25mm pistons just to be safe in case my cylinder walls are bored out a litttle. Would the .25mm make a huge difference if the bore was still 87mm. I'm guessing yes it would make a difference and that maybe I should get them measured just to be sure, but if anyone has any other advice??
12-02-2005, 04:01 PM
#5
0.5 BAR
Thread Starter
Join Date: Nov 2005
Posts: 74
Re: Woud this work??
Originally Posted by hotrex
you cany use .10 over pistons in a stock bore, it would need to be .10 over, but since you cant bore stock frm sleeves, you are fucked out of luck.
mahle pistons are ---- anyways
mahle pistons are ---- anyways
12-02-2005, 04:06 PM
#6
0.5 BAR
Thread Starter
Join Date: Nov 2005
Posts: 74
Re: Woud this work??
Originally Posted by 90boostdaccord
have fun sleeving that ----.
12-02-2005, 06:00 PM
#7
3.0 BAR
Join Date: Dec 2002
Posts: 12,568
Re: Woud this work??
no ---- mahle pistons are for frm sleeves.
do you not read up on h-t? none of the mahle pistons ft correctly they are junk,
and no, you can not bore frm sleeves.
honestly, a stock block h22a is useless, boost it as is, and hope it holds together
do you not read up on h-t? none of the mahle pistons ft correctly they are junk,
and no, you can not bore frm sleeves.
honestly, a stock block h22a is useless, boost it as is, and hope it holds together
12-03-2005, 02:42 AM
#8
0.5 BAR
Thread Starter
Join Date: Nov 2005
Posts: 74
Re: Woud this work??
Originally Posted by hotrex
no ---- mahle pistons are for frm sleeves.
do you not read up on h-t? none of the mahle pistons ft correctly they are junk,
and no, you can not bore frm sleeves.
honestly, a stock block h22a is useless, boost it as is, and hope it holds together
do you not read up on h-t? none of the mahle pistons ft correctly they are junk,
and no, you can not bore frm sleeves.
honestly, a stock block h22a is useless, boost it as is, and hope it holds together
12-03-2005, 03:05 AM
#9
0.5 BAR
Join Date: Apr 2003
Posts: 180
Re: Woud this work??
Originally Posted by h22a92Accord
I know that you can't bore frm sleeves, I never said that I could, and I don't know why that ever came up.
I dunno silly thought, but it may have come from this...
Originally Posted by h22a92Accord
just to be safe in case my cylinder walls are bored out a litttle.
12-03-2005, 03:12 AM
#10
0.5 BAR
Join Date: Dec 2005
Posts: 82
Re: Woud this work??
id like to just throw in from a machinest perspective the sleeves are borable but honostly youd be best off finding a small machine shop and just haveing them sleeve the block any compatent shop will be able to do it also good time to bore those sleeves and have the block resurfaced and acid bathed just a thought
boring frm sleeves .25mm is very doable wether you say no or not its do able at a compatent shop but be carful at such an incrament can be fucked up very easily
boring frm sleeves .25mm is very doable wether you say no or not its do able at a compatent shop but be carful at such an incrament can be fucked up very easily
