Wiring MSD 2-step to oem coil
#1
Wiring MSD 2-step to oem coil
. so i've searched long and hard and im not getting what i need.
i've heard its possible to hook an msd 2 step to the stock coil but i cant figure out how. it only has 2 yellow wires w/ a 2 prong connector for the rev, and a 12v, and gnd.
also do you have to run the 12v to the clutch switch with a relay and momentary button? or is there other ways of doing this.
id love some answers im ready to go out and put this thing in if i dont have to buy a full out msd ignition
i've heard its possible to hook an msd 2 step to the stock coil but i cant figure out how. it only has 2 yellow wires w/ a 2 prong connector for the rev, and a 12v, and gnd.
also do you have to run the 12v to the clutch switch with a relay and momentary button? or is there other ways of doing this.
id love some answers im ready to go out and put this thing in if i dont have to buy a full out msd ignition
#5
i have an msd 2 step with 2 rpm control modules that i paid 50 bucks for.. and was hoping to wire it in some time this week cause me and some ppl are goin to the strip tomarrow. (wanna see what my d15b will run n/a).
#6
with my hondata setup there is the interface (s200) .obviously, but im not familiar with how crome is ran. i was under the impression that you just chip your ecu and run the free-ware program with no actual box interface. and just tune it with an emulater and such.
and idk bout your fmu statement. fmu's are dirt cheap. my vortech that i ran when it was boosted before cost me 50 bucks. so idk how you'd chip a ecu and have some one tune it for cheaper than that... let alone half. but hey if you can give me some info. i wouldnt mind ditching the hondata and goin crome.
#9
Once i set the launch rpm for the 2 step its un-changable obvisouly. Anyone have any idea is you could hard-wire an msd rpm control module to the rev to be able to change it?
it is only 2 wires...
#10
ok crome says it can add "extra features" like 2 step blah blah blah to obd1 P30 and P72? what does that mean exactly.... i have a p28 and planning on starting with a p08 basemap. how do i activate that feature on crome?