will a B16 full gasket and seal kit work on a B18c1?
 

i know the intake gasket is diffirent. and i've been told the TB gasket is as well!
but will everything else work? and are 100% sure on this?
let me know.
thanks

Re:will a B16 full gasket and seal kit work on a B18c1?
 

I believe the TB size are different between the b16 and the b18... correct me if i'm wrong guys

Re:will a B16 full gasket and seal kit work on a B18c1?
 

wrong... they're the same (60mm)... at least in my experience

Re:will a B16 full gasket and seal kit work on a B18c1?
 

damn it guess I should have searched!

D series 5th and 6th gen Civic's = 56 mm
B series non-vtec = 58mm and 1st gen B16's
B VTEC = 60mm (and B20) 2nd gen up for B16's
Type R = 62mm
H series = 60mm

Im assuming they are the same bolt pattern if they are both OBD1 or OBD0 B-series engine

http://honda-tech.com/zerothread?id=220576

Re:will a B16 full gasket and seal kit work on a B18c1?
 

ok, now how about the question!?!
thanks

Re:will a B16 full gasket and seal kit work on a B18c1?
 

guess i'm owned... i've had a b20b and a b18b recently, both of which measured 60mm... anyways, other than the manifold & tb, everything should be the same... you have to look at your tb... I've seen GSR throttle bodies w/ and without that idle control solenoid thingy...