Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

wifes car cant get rid of CEL

Thread Tools
 
Search this Thread
 
Old Jun 25, 2006 | 06:26 PM
  #21  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

Originally Posted by StanB
You can use the scan tool to erase the error code. I've used a Snap-On scan tool and it has the option.
have already done that.that isnt the problem i cant get rid of it because of a rich condition due to the fact that obd II OWNS ME!!! read the whole post i am open to your opinions
Old Jun 25, 2006 | 10:19 PM
  #22  
StanB's Avatar
1.5 BAR
 
Joined: Sep 2003
Posts: 842
Default Re: wifes car cant get rid of CEL

Did you make sure the universal O2 sensors were wired properly? After reading all the posts, the only thing I have to add is a faulty fuel pressure regulator or fuel return line. Before you check the FPR, disconnect the negative battery cable for about 30 seconds. Reconnect it, start the car and see if the light is still on. If the light is still on (based on all the parts you've changed) ask someone that have access to Alldata or Mitchell on Demand to check and see if there was a Technical Service Bulletin (TSB) that was issued for 1998 Civics regarding this check engine light issue.

Old Jun 25, 2006 | 10:44 PM
  #23  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

Originally Posted by StanB
Did you make sure the universal O2 sensors were wired properly? After reading all the posts, the only thing I have to add is a faulty fuel pressure regulator or fuel return line. Before you check the FPR, disconnect the negative battery cable for about 30 seconds. Reconnect it, start the car and see if the light is still on. If the light is still on (based on all the parts you've changed) ask someone that have access to Alldata or Mitchell on Demand to check and see if there was a Technical Service Bulletin (TSB) that was issued for 1998 Civics regarding this check engine light issue.

had a universal o2 just swapped out for ubstream and downstream oem o2's
have already checked micthell and was following most of its guide lines checked the stock fpr but now have another to replace it with. havent checked the return line as of yet but i guess thats my next option. anything else to look for that maybe i have left out.
Old Jun 25, 2006 | 11:48 PM
  #24  
StanB's Avatar
1.5 BAR
 
Joined: Sep 2003
Posts: 842
Default Re: wifes car cant get rid of CEL

I suggested you check for any Technical Service Bulletin (TSB) but you did not state if you did. See link below for some information I found online. Read the summary for the cause of your problem.

You can verify the information by checking the TSB section in Mitchell on Demand.


http://www.hondacivicforum.com/recal...010202/TSB.htm
Old Jun 26, 2006 | 12:04 AM
  #25  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

Originally Posted by StanB
I suggested you check for any Technical Service Bulletin (TSB) but you did not state if you did. See link below for some information I found online. Read the summary for the cause of your problem.

You can verify the information by checking the TSB section in Mitchell on Demand.


http://www.hondacivicforum.com/recal...010202/TSB.htm
i have been thinking of changing out the injectors and now after reading that i will make that top priority!!! thanks for the link!!!!
Old Jun 29, 2006 | 08:48 PM
  #26  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

ok i finnaly got around to swapping injectors and BANG!!!! that was the fix for the rich code!!! THANKS GUYS FOR THE HELP!!!! but now i am getting code 67 which is catalyst system.is there anyway around this before replacing the cat any further help is greatly appreciated!!!
Old Jun 29, 2006 | 10:19 PM
  #27  
Zeniceguycrx's Avatar
3.0 BAR
 
Joined: Feb 2006
Posts: 3,905
Default Re: wifes car cant get rid of CEL

no problem, when my cars fucked you better have my answer

jk
Old Jun 30, 2006 | 09:52 AM
  #28  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

but now i am getting code 67 which is catalyst system.is there anyway around this before replacing the cat any further help is greatly appreciated!!!
any thoughts
Old Jun 30, 2006 | 08:56 PM
  #29  
Zeniceguycrx's Avatar
3.0 BAR
 
Joined: Feb 2006
Posts: 3,905
Default Re: wifes car cant get rid of CEL

if uv been dumping fuel in it for a while it will be cloged up, tray taking it foar a nice hot rip on the highway if that doesnt work you prob have to replace..

just get a universal put in for like 110
Old Jun 30, 2006 | 08:59 PM
  #30  
sikcrx89's Avatar
Thread Starter
3.0 BAR
 
Joined: Apr 2006
Posts: 3,015
Default Re: wifes car cant get rid of CEL

found a used cat by chance at a buddies shop and put it on and that was fix no more CEL and got through emmisions with honors.

THANKS ONCE AGAIN TO EVERYONE THAT HELPED ME IN MY TIME OF DESPERATION!!!!!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SkunT
Turbo Parts For Sale
36
Dec 3, 2005 01:02 AM
SkunT
Turbo Parts For Sale
3
Mar 21, 2005 08:02 AM
SkunT
Wanted
10
Dec 17, 2004 10:08 AM




All times are GMT -5. The time now is 04:52 PM.