wich itbs on my setup?
3.0 BAR
Joined: Oct 2005
Posts: 3,936
From: St. Augustine FL
Re: wich itbs on my setup?
Originally Posted by 95 civic B16A
no, ctr pistons in a b16a will make 11
.1, my friend used a compression caculator on it, and everyone on honda tech said high 11's c/r
.1, my friend used a compression caculator on it, and everyone on honda tech said high 11's c/r
3.0 BAR
Joined: Aug 2003
Posts: 4,664
From: NE-PA
Re: wich itbs on my setup?
Originally Posted by turbohf
interesting facts:
PCT/B16B/CTR pistons will hit a P72 head...with every combination of blocks...
C-Speeds calculator is wrong... try: http://www.zealautowerks.com/index.html take note of the pistons-head clearances (see above)
in a B16B the piston is the same height as the deck (at the intake and exhaust sides of course)
NA motors are ------ slow...
i dont care if its got cams, and ITB;s... S L O W :1
PCT/B16B/CTR pistons will hit a P72 head...with every combination of blocks...
C-Speeds calculator is wrong... try: http://www.zealautowerks.com/index.html take note of the pistons-head clearances (see above)
in a B16B the piston is the same height as the deck (at the intake and exhaust sides of course)
NA motors are ------ slow...
i dont care if its got cams, and ITB;s... S L O W :1 
I do know that the ctr motor is basicly a b18c bottom half destroked to 1.6 liters. Oh, and I just checked it on the zealworks site...piston to deck height shows -0.007...out of the hole. :P
Thread
Thread Starter
Forum
Replies
Last Post
