HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   where do these lines go? (https://www.homemadeturbo.com/hybrid-tech-8/where-do-these-lines-go-82308/)

the 13th round 09-07-2007 11:22 AM

where do these lines go?
 
im having trouble hooking up the coolant lines on my intake/throttle body.
its a larger TB that im not sure which car it came off, i think a b18 because it is 60mm.
if anyone could point me in the right direction on where the line off the thermostat housing should go
i outlined as well as i could in the pictures to make my problem easier to understand. ( i dont know why the photos are so small first time that has happened)

http://i96.photobucket.com/albums/l1...und/img001.jpg

http://i96.photobucket.com/albums/l1...thIMG_0769.jpg

http://i96.photobucket.com/albums/l1...thIMG_0770.jpg

these arent big enough for the hose dia. but i dont know what to do with them either, my head is going to have a breather filter on the pcv port.
http://i96.photobucket.com/albums/l1...thIMG_0768.jpg

Guy-Fast 09-07-2007 02:07 PM

Re: where do these lines go?
 
d16a6 manifold only accepts d16a6 tb unless its bored over still making it a d16a6 tb

the 13th round 09-07-2007 02:16 PM

Re: where do these lines go?
 
o man this is rigged up believe me, only three holes lined up, had to bore out the fourth. i just cant figure out what to do with that line, everything else is connected on the TB.

Guy-Fast 09-08-2007 05:12 AM

Re: where do these lines go?
 
you dont need to run those through the tb. I never run water lines to my iacv's either. Smooth 800-900 rpm idle on everything I touch

the 13th round 09-08-2007 10:49 AM

Re: where do these lines go?
 
so just cap it off??

ososlohatch 09-08-2007 02:35 PM

Re: where do these lines go?
 
put a short hose on them with a bolt in the end ;) :y

Guy-Fast 09-08-2007 02:37 PM

Re: where do these lines go?
 

Originally Posted by ososlohatch
put a short hose on them with a bolt in the end ;) :y


word

the 13th round 09-09-2007 02:54 PM

Re: where do these lines go?
 
what about the water nipples on the intake manifold close to the cylinder head?
there are two ports there, could i just route the big line off the thermostat housing to the big nipple on the cylinder head?
and the little nipple on the water inlet pipe could be connected to the small port????
thus recirculating the water rather than plug it because i dont know where the ports on the intake manifold are supposed to go, heres a drawing to help visualize what im rambling about.

http://i96.photobucket.com/albums/l1...IMG_0770-1.jpg

the 13th round 09-10-2007 07:38 PM

Re: where do these lines go?
 
ok o well im going to try it that way and start it up tonight.


All times are GMT -5. The time now is 09:13 PM.


© 2024 MH Sub I, LLC dba Internet Brands