what jdm turbo pumps out the most boost?
I need a turbo for my b series , its a low compression b16a2.
I'm looking for a JDM turbo that makes 20+psi and has a t3 flange. i'm using a s13 turbo but n its only good for 12psi cause its ceramic . GUY"S I NEED UR HELP what can i use off what car? |
hahaha ok this has to be a joke. an old member maybe?
|
JDM turbo?
Peaked my interest.....lol |
If you need something with a t3 flange.. why not go with a T3???
can't the garrett T3's put out about that??? (i've never owned one,, but just checkin) I know that the T25's can put 12psi + and the T28's 16psi +.... So I imagine T3's could get close to 20 if not there. you must be runnin somethin pretty simple with a 12psi max. |
its not the style of turbo that counts (t3,t25,t28) its the size that makes it be able to push more boost alot of different factors like trims and a/r's and ---- like that that is going to be what amount boost it can push
|
goals should be in HP not PSI
|
well gols are usually setup in boost now a days with these faggot ass jdm turbo having hondatech fags
|
Just drive a screwdriver down the side of the wastegate arm on your current turbo, it'll hold your flapper shut and it'll boost higher....
|
Originally Posted by EvansPerformance
(Post 1274854)
goals should be in HP not PSI
|
Originally Posted by DraginX
(Post 1275154)
Just drive a screwdriver down the side of the wastegate arm on your current turbo, it'll hold your flapper shut and it'll boost higher....
|
I wantz teh 50 Psi Turbo Kit Stage 7 with 100 8WHP
|
mad JDM is the new pink. :p
|
this thread delivers
|
you sohuld go on ebay and get that
super mad tyte jay-dee-emmm turbo they sell for 150 dollars but!!!!! heres the lil secret instead of paying 150 you pay 300!!!! you get twice the power and it's hella jdm |
just when i thought this stupid ------- thread was finished you had to bump it
|
bet you the op doesnt even kno what JDM stands for. These little f@gs just think its some three letter word that was made up to describe import parts.
|
who cares what jdm means its all gay
|
Originally Posted by turbof22a
(Post 1276353)
who cares what jdm means its all gay
|
your right on this one the gauranteed way to sell a part on ebay is to say jdm even if the usdm part is exactly the same
|
I rock EDM ---- on my whips yo
|
Originally Posted by croninc
(Post 1276299)
think its some three letter word that was made up to describe import parts.
|
Originally Posted by cvcrcr99
(Post 1275291)
+1
|
T3/T4 60 trim, .48 hotside
|
Just wait till IDM parts flood the market next.
|
Indonesian domestic market??? haha
|
Originally Posted by kona447
(Post 1282183)
Indonesian domestic market??? haha
|
All times are GMT -5. The time now is 05:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands