VX/Z6 swap, code 19 ??
07-08-2006, 01:42 PM
#1
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,129
VX/Z6 swap, code 19 ??
finally got my friends car all finished and its throwing a code 19. its a N/A z6 in a VX. we used the z6 engine harness. and i dont know why its saying automatic transmission lockup control valve.
07-08-2006, 11:14 PM
#5
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,129
Re: VX/Z6 swap, code 19 ??
Originally Posted by z1guy
you must be running an auto ecu.
07-09-2006, 10:42 PM
#8
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,129
Re: VX/Z6 swap, code 19 ??
Originally Posted by cberman
jsut cuz the ecu was in a manual doesnt necesarily mean it was the original ecu. open up the ecu case and take a look
07-09-2006, 10:44 PM
#9
1.5 BAR
Join Date: Mar 2006
Posts: 835
Re: VX/Z6 swap, code 19 ??
Originally Posted by zex_cool
i did, and it manual. one more thing the ecu is chipped. running a stock z6 map + redline at 7500, disabled second O2 sensor and vtec at 4400. could it be the chipping job ?? the guy that did it is one of THE best in Boise, ID.
07-09-2006, 10:57 PM
#10
1.5 BAR
Thread Starter
Join Date: Dec 2005
Posts: 1,129
Re: VX/Z6 swap, code 19 ??
Originally Posted by z1guy
weird, obd0 and obd1 only have 1 o2. pull the code again, if its a code 19 and you know for sure its a manual ecu its gotta be operator error on your part.
we're using a chipped p28.
